Customer wants to overlay multiple Siemens Desigo Sites with one Tridium system (enterprise solution).
Has anyone done this before?
Is the Desigo database BACnet discoverable by default or is...
Type: Posts; User: vaultein
Customer wants to overlay multiple Siemens Desigo Sites with one Tridium system (enterprise solution).
Has anyone done this before?
Is the Desigo database BACnet discoverable by default or is...
Oh man. Thank you.
Sent from my iPhone using Tapatalk
I am trying to pull Bacnet points off of a ALC system to a 3rd party device.
The ALC server has two network cards.
The controllers are on the private network and the third party device is on the...
Hi,
I’m working on a project to improve the Alarm Manager in the new MUI.
Wondering if anyone knows if these few items are feasible.
-Create preconfigured alarm filters? E.g., you click on a...
You need to set up one device per network as a BBMD device. Bacnet cannot communicate over other subnets on its own.
Sent from my iPhone using Tapatalk
Hi,
So I built and commissioned a large job on a FX80 with N4 software. Now the customer decided that are not upgrading the Server from AX to N4 and wants the Jace to be AX compatible.
Is...
Resolved!
Turned off the firewall and anti-virus, uninstalled 4.6 & 4.7, deleted any instances and remaining files in C:, restarted, reinstalled 4.6 & 4.7, reactivated anti-virus and firewall, local...
plat uninstalldaemon and plat installdaemon come back "successful"
When going into services "Niagara" is not running. when trying to manually start it, I get "Error 1067: Process terminated...
Windows services does not let me start Niagara. It gets n error.
Sent from my iPhone using Tapatalk
Tried this as well. No luck.
c:\honeywell\webstation-n4-4.6.96.28>plat.exe -uninstalldaemon
INFO [nre] Launching Niagara Runtime Environment
INFO [14:17:18 18-Jun-19 EDT][nre] Booting
INFO...
Tried. No luck
Sent from my iPhone using Tapatalk
Hi,
Workbench 4.6 (JCI 14.6) and above will not allow me open the local platform?
Iv'e tried all versions and no luck.
Anyone can please help?
Thanks,
javax.baja.naming.UnresolvedException:...
You won’t find the WiFi config in AX only N4.
You may be able to set it up in N4 platform and then try logging into it in AX.
Never tried that.
Sent from my iPhone using Tapatalk
I use it on every job I have. Set it up once and never plug in again.
In platform/WiFi config, access point tab. Configure the WiFi name, password and timeout to 0 (otherwise the connection will...
Has anyone used a SMTP Trap to send emails out to a client?
I have a Eagle AX controller that needs to send out alarms. The client is a big corporate company that allows us on their network, but...
This happens to me periodically.
I’ve not found a solution. Just retry starting the program multiple times and eventually it loads.
Sent from my iPhone using Tapatalk
Fujitsu makes one. UTY-VBGX
So far, its a glorified dumb stat.
you can change setpoints and unit modes (Heat/Cool/Auto). you can not see space temperature or what the unit is actually doing...
Hi,
Was tasked with integrating a bunch of Fujitsu Halcyon units using the Fujitsu Bacnet gateway.
Two issues at hand.
1 - Space temperature reads 32 degrees on all units.
2 - The points...
So I’ve been tasked with taking over a ALC system and integrating it into a N4 Jace. Looking for suggestions on the best route to tackle this.
What I have is;
-LGR1000,
-Off of that I have a...
Thanks guys. I ended up using the parameters for air flow and made the range like 5000. Works great so far.
Question though... The set point changes drastically based on Running chillers (2100...
Hi,
Is there a way to automatically backup trend data from a FX60E onto a PC without having workbench on the PC?
Sent from my iPhone using Tapatalk
Correct. Left everything at zero aside for The PB and integral.
The issue I'm having is I can't get it to react slowly. No matter what I put in its all over the place.
Sent from my iPhone...
Hi,
Can someone please share the tuning parameters they successfully used to control a pump to a large GPM.
I'm trying to tune a chilled water pump to 2100GPM and can't seem to get it right. ...
Thank you for this. I knew it was a limited Jace, but didn't know you can't log in through workbench.
All I was supposed to do was pull in the points via bacnet, which I did fine.
The issue was...
Whoops. Ok thanks.
Sent from my iPhone using Tapatalk
Does anyone know the default workbench login for these guys? https://images.platforum.cloud/uploads/20170524/19acea8eb4c7f50a15ed4ea5f81e52ae.jpg
Sent from my iPhone using Tapatalk
That worked. Thank you!
Sent from my iPhone using Tapatalk
Ok thanks.
Sent from my iPhone using Tapatalk
Hi,
What's the most efficient way to back up a CCN network?
Currently, I'm scanning every bus and uploading each controller, one at a time.
Any time saving tips are much appreciated.
...
Thanks.
It says global modify is not available for this point.
Sent from my iPhone using Tapatalk
I'm coming for the niagara world and wondering if there is a way to mass write to the same point on every CCN comfort ID.
Specifically to the airflow error deadband which is currently at 18.8% on...
Hi,
Just switched over some 100 VMA's to N4 and for some reason the setpoints only take when overriding it. Set just sits there and doesn't update. ...
There are XTM's sitting on the N2 trunk. They are dummy IO modules not connected to any controller.
Sent from my iPhone using Tapatalk
Ok so the issue is the device type. The 3rd party that did the conversion did not add the XTM in the right way.
How do I change the device type, once already in the station?
Sent from my...
Hi,
I just did a NAE to FX80 Conversion...
All the UNT's and DX9100 controllers come in fine. However, all the XTM's are not communicating.
Has anyone had this issue?
Thanks
It is a little heavier since it has the plastic bottom, but manageable. There is nice padding on the back, never have issues with the bottom touching my back, it's offset.
Again it's not perfect,...
Laptop sleeve and room for paperwork in back and tool storage in front. It's not perfect, but the best I've seen for computer and tools combo...
Just spoke to them. They do it.
Thanks you!
Sent from my iPhone using Tapatalk
Thanks.
I found the hardware nav in one of the tabs.
Do you know how to archive and retrieve the database?
Sent from my iPhone using Tapatalk
Correction it's two NAE's to N4.
Is there to make a report on all the controllers and their point addresses?
https://images.platforum.cloud/uploads/20170322/f5c9802475eda255f7b0cabb533d9548.jpg
...
Hi,
I'm doing an upgrade from a NC to Jace8000 with legacy Metasys field cotrollers (DX9100, UNT's).
What is the most efficient way to convert the database?
I heard once there is software...
The contractor supposedly set up the HD150.
I can ping the devices, but cannot discover them on the FX60.
Can someone please share a screenshot of the Bacnet/IP property sheet? want to make sure I...
Where can I get that Jar file?
Had this happen to me as well. Whenever the computer restarted, the Host ID changed. Ended up getting a new computer to solve the issue ( was an old computer).
Where can I get the latest version of the configuration tool?
Anyone have experience using compact laptops or tablets for service work?
Needs to be able to handle any program and interface, including virtual machine for the older stuff.
My laptop is great...
Iv'e seen then get brittle in hot area's. What I meant was, they can take a beating. Iv'e seen them get soaked and come back to life.
Had the same issue. Replaced the timezone .jar file from 6.1 in the "lib" folder. solved the issue.
That was my original thought, but these are old units and not practical to do this in a cost effective way.
Thank you.
Existing units and controls, so replacing valves won't work.
Is there anything other that a DPT that I can use?