Search:

Type: Posts; User: clseahorse

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Anybody out there have any experience with the...

    Anybody out there have any experience with the Goodman mini split?
  2. Also, I allready have a hole through the wall...

    Also, I allready have a hole through the wall where a woodstove used to go. I would need the indoor unit to mount to the right side of the hole. Do all units have the wires etc. coming in to the...
  3. NO, the ceiling is 1 ft thick concrete which is...

    NO, the ceiling is 1 ft thick concrete which is why I can't get ductwork down there from upstairs.
  4. Wanting to instal mini split - need advice

    I'm wanting to install a mini split system in a basement apartment. There is one large room and two bedrooms. Large room is about 600 sq ft. Bedrooms 300 and 400 sq ft. I would like to just install...
  5. Replies
    167
    Views
    9,698

    It's loudest at that one return. Apparent but not...

    It's loudest at that one return. Apparent but not really bothersome at all the others. Unfortunately that return is in my bedroom/office where I spend most of my time. Ouch. Or at least used to spend...
  6. Replies
    167
    Views
    9,698

    Anybody out there have an old 30 year old 150...

    Anybody out there have an old 30 year old 150 BTU????? That one did the job just fine! So much for advanced technology in an unadvanceable enviroment!
  7. Replies
    167
    Views
    9,698

    I'd say the duct from the grill to the box is 4...

    I'd say the duct from the grill to the box is 4 to 5 ft. Harmonic frequency is exactly what it sounds like but onlt through the ducts. Standing next to the furnace it's not an issue. If it gets worse...
  8. Replies
    167
    Views
    9,698

    OMG

    Oh no!!! So by fixing it, I broke it!! Jeez!!! This is driving me nuts. Yes, he sealed everything up super tight and my attic is now 74 degrees instead of 100 plus. Thats what the other contractor...
  9. Replies
    167
    Views
    9,698

    whine,whine, whine

    O.K. a friend helped me remove the grills. Still got this awful high pitch whine at high speed blower. Tracking it down it seems to be loudest at the back of the furnace towards the return duct side....
  10. Replies
    167
    Views
    9,698

    Whine

    Got those covers back on. Thanks again!!!!! Now about this whining. (no not me, the furnace!!!!!) On low speed all is fine. When it switches to high speed it gets this high pitched whine. Most...
  11. Replies
    167
    Views
    9,698

    Well spotted

    Thank you advanced response. You are right. I found them laying on the bottom of the furnace. Can I put those in myself? Anything to be careful of?
  12. Replies
    167
    Views
    9,698

    pics

    Here are some pics. I don't know if you can enlarge them to see the details: My worries were the flame seems to have a lot of red and orange in it and it looks with my inexperienced eye to kinda run...
  13. Replies
    167
    Views
    9,698

    Update:

    Hey guys,
    O.K. The original contractor sent a man out yesterday to replace my furnace with the 90. He dropped the "cap the valves" idea thank goodness.
    It was all very interesting. I got to...
  14. Replies
    167
    Views
    9,698

    Variable speed

    What I read about the variable speeds sounds kinda complicated for my house. It seems that they operate a lot off of memory or recorded temperature situations in the home. I would think my solar heat...
  15. Replies
    167
    Views
    9,698

    Final verdict

    Single Mom - kid going to college next year - really need to try to avoid any more debt. So how about this plan:

    Everybody agrees the 140 is too big.I don't think leaving it in and capping it...
  16. Replies
    167
    Views
    9,698

    Yes. the downstairs lags behind about 3 degrees...

    Yes. the downstairs lags behind about 3 degrees but that is in a big room with only one vent so understandable. Also it's mostly underground and the part that doesn't heat well is the part thats not...
  17. Replies
    167
    Views
    9,698

    yes it does - there is only one

    yes it does - there is only one
  18. Replies
    167
    Views
    9,698

    Contractor one just now wants to cap a few valves...

    Contractor one just now wants to cap a few valves and call it job done, Jeez I'm sick of this. Is this a proper fix? Whats a helper duct?
  19. Replies
    167
    Views
    9,698

    Cool, Thanks!!!!!! I can process that. Lot's to...

    Cool, Thanks!!!!!! I can process that. Lot's to think about and digest. It's never easy. Thanks a lot!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  20. Replies
    167
    Views
    9,698

    Blonde guys. Sorry. Doesn't work for me. Not sure...

    Blonde guys. Sorry. Doesn't work for me. Not sure what you mean by old and new and couldn't work that equation anyway. Hah Thanks for trying. I really do appreciate the help. Your comments are great...
  21. Replies
    167
    Views
    9,698

    gotcha so gotta put the 90 in first. Then take...

    gotcha so gotta put the 90 in first. Then take new measurements is that correct? To determine if the 90 is then going to work. Nothing we can do beforehand . Do I have that right?
  22. Replies
    167
    Views
    9,698

    It's my old AC that went with the 155 BTU...

    It's my old AC that went with the 155 BTU furnace. It works and I rarely use it so didn't want to go to the expense of changing it right now if I didn't have to. I hate AC and only use it on the...
  23. Replies
    167
    Views
    9,698

    Does the 1.2 static pressure not sound right? I...

    Does the 1.2 static pressure not sound right? I did wonder if he was taking that at low fire or high? I said something but........just got a "we're not stupid look." But the furnace hadn't been...
  24. Replies
    167
    Views
    9,698

    He said the total static pressure was 1.2 the CFM...

    He said the total static pressure was 1.2 the CFM on the heating was 680 to 700. The AC is 5 ton which he said would be rated 2000CFM. All greek to me........

    As for the other questions I do have...
  25. Replies
    167
    Views
    9,698

    Update

    New guy came out. Checked temp and static pressure. Said static pressure was way too high. Thought the returns were sufficent but furnace not able to move enough air through the vents. He said I...
Results 1 to 25 of 47
Page 1 of 2 1 2
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event