Search:

Type: Posts; User: aco2451

Search: Search took 0.01 seconds.

  1. I will scan the diagrams in the manual and post...

    I will scan the diagrams in the manual and post them tomorrow.

    As far as a update the OEM ignitor did not fix the problem. Tech took apart the burner tubes, and gas inlet thing that screw on the...
  2. Correction the PVC pipes are 2" and the unit is...

    Correction the PVC pipes are 2" and the unit is 80,000 but

    Tech guy is here, replace the ignitor with a OEM one and it actually made it worse... he is now taking apart the burner tubes and...
  3. Gas Pressure was adjusted to 3.5, was at 2.1 when...

    Gas Pressure was adjusted to 3.5, was at 2.1 when he first check it out thinking the pressure was too high.

    I'm not sure on the BTU input I can check that when I get home.

    the PVC pipes are I...
  4. Try this. ...

    Try this.


    http://www.youtube.com/watch?v=NFmw2FycMLQ&list=HL1360701868&feature=mh_lolz
  5. One thing I have noticed that all 4 burners...

    One thing I have noticed that all 4 burners ignite a the same time. not one at a time.

    The tech looked over the burners and said that they looked good.

    I tried to take a video of what it's...
  6. The tech told me from the start that he's never...

    The tech told me from the start that he's never seen a unit set up like that in 25 years.
    The flame sensor is on the right side next to the gas inlet and the ignitor is on the left side by the last...
  7. It is a natural gas furnace. The boom never...

    It is a natural gas furnace.

    The boom never happened before the ignitor was replaced.... the tech talked to a York service tech who stated that the Diamond 90 furnace requires use of a OEM...
  8. well, the tech did make a comment to me that the...

    well, the tech did make a comment to me that the gas comes in on the right and the ignitor is all the way on burner #4 on the left side.

    but thats how it was made from YORK
  9. Well I called what I though was the YORK dealer...

    Well I called what I though was the YORK dealer in my town but found out that he sold to another company which I have found out is a bryant and trane dealer.

    the nearest YORK dealer is over an...
  10. Explosion Type Ignition (YORK Diamond 90 furnace)

    I'm just a home owner trying to find some answers.

    bought the house in October 2012 so don't know much history on except it was installed in 1995.

    1/30/13- came home to a cold house. determined...
Results 1 to 10 of 10
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event