Search:

Type: Posts; User: sundodger4

Search: Search took 0.00 seconds.

  1. Replies
    12
    Views
    740

    The integration is all through BACnet/IP through...

    The integration is all through BACnet/IP through the NAE. The VLX has a MSTP trunk hanging off of it, not the NAE. The MSTP trunk data comes through to the NAE but the BACnet IP data does not. The...
  2. Replies
    12
    Views
    740

    This is all on the same subnet so no BBMD is...

    This is all on the same subnet so no BBMD is required, that said I tried it anyway with no luck.
  3. Replies
    12
    Views
    740

    No all of the Alerton is on a system of its own,...

    No all of the Alerton is on a system of its own, MSTP trunk is tied to an Alerton device, a VLX. I can integrate the MSTP side of the device into the NAE but the points that come from the IP side...
  4. Replies
    1
    Views
    370

    I set one of these up a couple of years ago and...

    I set one of these up a couple of years ago and did it via the RS-232 port on the card. The device name you are putting in is a number, right? This should be your device or instance ID and has to be...
  5. Replies
    12
    Views
    740

    No IP conflick or instance ID conflict.

    No IP conflick or instance ID conflict.
  6. Replies
    12
    Views
    740

    Integrating Alerton to Metasys MSEA

    We have a Metasys front end version 5.2 and we have an Alerton system we are trying to integrate into Metasys via BACnet/IP and BACnet MS/TP. The MS/TP comes in fine but the IP side shows up offline...
  7. That took care of the problem, I only had the...

    That took care of the problem, I only had the Lutron panel in teh BBMD, when I did as you said, put the NAE IP in there also it fixed the problem, thanks
  8. So far i haven't brought it in since it won't but...

    So far i haven't brought it in since it won't but I am trying to using the BACnet IP not MS\TP. Again i have had success with many different vendors both brought in BACnet MS\TP and BACnet IP and...
  9. Yes I can ping the panel.

    Yes I can ping the panel.
  10. Thanks but the Lutron guy was here and BACnet is...

    Thanks but the Lutron guy was here and BACnet is exposed. I saw the Lutron devices once but then they went offline and I was not able to get them back again, they would no longer show up on the scan.
  11. Yes the UDP is set up to 47808. The BACnet ID's...

    Yes the UDP is set up to 47808. The BACnet ID's start at 1760000 and yes the ports are open. When I scan I pick up a lot of other devices already on our network. Yes I can ping the Quantum system. I...
  12. Replies
    2
    Views
    1,068

    if i recall correctly there is an security issue...

    if i recall correctly there is an security issue with Java 1.7. At any rate you can run multiple versions of Java but with some you may have to go back and install the older version as it gets wiped...
  13. Integrate Lutron Quantum lighting panel into a JCI MSEA system

    has anyone integrated a Lutron panel into a Johnson Controls MSEA system using BACnet. I am having trouble getting the devices to be seen. Have integrated many other vendors but no luck so far with...
  14. Replies
    1
    Views
    391

    MSEA Reports

    Does anyone know if you can have a scheduled report automatically sent out via email?
  15. Replies
    3
    Views
    1,108

    5.2 JCI SCT NAE download

    I have almost completed my upgrade to 5.2 and everything went fine until my last NAE download. When it downloaded it came back with an error of (Device Status is not Operational (526)). The NAE...
  16. Replies
    4
    Views
    429

    It is version 5.2.0.5400

    It is version 5.2.0.5400
  17. Replies
    4
    Views
    429

    MSEA ADX download

    After upgrading to version 5.2 I downloaded my ADX and it says it downloaded OK. Everything works but my userviews and graphics folders did not download, has anyone else had this problem? If so what...
Results 1 to 17 of 17
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event