Search:

Type: Posts; User: OldSoCalCondo

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Well, I went from a MERV 11 filter to MERV 16 and...

    Well, I went from a MERV 11 filter to MERV 16 and the pressure dropped from 1.15 inches at 1154 CFM to 1.06 inches at 1154 CFM. Huh?

    I put in a Lennox Healthy Climate 16 filter. Any opinions...
  2. So if I change the return duct to a bar style,...

    So if I change the return duct to a bar style, will that help enough to matter? Can I do a Merv 13?
  3. Replies
    4
    Views
    753

    I would like e dehumidifier with a remote...

    I would like e dehumidifier with a remote humidity sensor. It could be wired or wireless remote. I think that would help.
  4. I believe I have Merv 11 in the system right now....

    I believe I have Merv 11 in the system right now. (That is what I was sold.) With that I get a Static Pressure Check of 1.15 inches at 1154 CFM. And it says that is too high.

    So, will a Merv 13...
  5. Well, I have the infinity controller, and I...

    Well, I have the infinity controller, and I believe it will show pressure with the current filer and vents. Not pressure drop, but pressure. If I got those readings would that help?
  6. Wow, I guess I messed up the question some how. ...

    Wow, I guess I messed up the question some how.

    Can I use a MERV 16 filter in my system or will the pressure drop be too much for the system? Will I burn out the motor?

    If someone had a four...
  7. Replies
    4
    Views
    753

    My standalone has settings down to 30%. Of...

    My standalone has settings down to 30%. Of course when it is running the setting compared to six feet away is off by a lot. But this only causes cycling as it realizes its mistake in turning off.
    ...
  8. Best 4 inch filter for Carrier Infinity 2 stage three speed system?

    I tried searching and reading but I couldn't find a good answer, although I did see some for the one inch filters and even recommendations to get four inch upgrade. But I didn't see what filter is...
  9. Yes, I do believe the building leaks. I have...

    Yes, I do believe the building leaks. I have added weather stripping to doors, and sealed cracks I have seen so far. More to go I guess, just not sure where to check.

    Good idea about checking...
  10. And let's not forget how it is advertised...

    And let's not forget how it is advertised...
  11. Well, I have used the system for a while with...

    Well, I have used the system for a while with days getting up to mid/high 80s outside. Inside it is set to 78F, and it will cool past that set point down to 76F.

    It has never gotten the condo...
  12. I did find this attachement -...

    I did find this attachement - http://hvac-talk.com/vbb/showpost.php?p=1387297&postcount=18

    And this statement from jrbenny - For every degree below 75°F, target humidity is raised 2%. You can't...
  13. Thanks jrbenny, let me know what you think and...

    Thanks jrbenny, let me know what you think and how sure you are. This is an important issue for me so I do appreciate the help. Thanks beenthere for letting me know jrbenny's background, that...
  14. Oh, and Carriers marketing says things like: ...

    Oh, and Carriers marketing says things like:

    "Superior humidity control" - For Infinity AC.
    "Infinity™ Control—you have precise control over temperature, humidity, ..." - For the T-stat.
    ...
  15. acmanhoney, When I set it to 46% and the...

    acmanhoney, When I set it to 46% and the dehumidify is set on, no it does not cool beyond the set temp. It should, but it turns off at the set temp. I wonder if it has a differential humidity...
  16. OK, I understand the system won't cool too much...

    OK, I understand the system won't cool too much to reach the desired dehumidification. In fact the manual as much as states that when the talk about the two modes of dehumidification. The...
  17. My Condo is at 50% now but in various places I...

    My Condo is at 50% now but in various places I get mold and mildew. I would be happy if I actually got the house down to 40%. I can ramp the humidity up once I get rid of the problem and I find the...
  18. Carrier Infinity control lowest humidity setting 46%

    Well, I just had the complete Infinity system installed, AC, Furnace, and Control. The unit is communicating and reading correct outdoor temp. I have set the basic Himidity setting to one bar/one...
  19. The double the thickness idea was my own to try...

    The double the thickness idea was my own to try to get better air cleaning. I knew it would put a lot of stress on the fan...
  20. If I get the standard Carrier filter box, can I...

    If I get the standard Carrier filter box, can I put a better filter in it? By better I mean one that will pull more allergens from the air .
  21. Yes, I am ordering the Infinity control. After...

    Yes, I am ordering the Infinity control. After all that will be the heart of the humidity control. The point about producing is a good thing to remember. You know I may be for saving the whales,...
  22. Carrier Infinity system with what filter?

    OK, I need even more advice. Thanks so much for the help this forum has given me so far.

    I have decided on a Carrier Infinity system. That will give me humidity control, for which my condo...
  23. Non-Carrier dealer install, still warranted?

    If I buy a full Carrier system form a non-carrier dealer and they install it, will it still be covered by Carriers warranty?

    Basically I have a AC company that normally doesn't do Carrier but will...
  24. Replies
    1
    Views
    624

    I think bid #2 should be 58CVX070112, not...

    I think bid #2 should be 58CVX070112, not 58CUX070112.
  25. Replies
    1
    Views
    624

    Need help understanding bids

    I have two bids that I am considering. Both should be for a two ton Carrier infinity full system with Furnace and AC, and should qualify for the rebate of $1,000. But they are written differently...
Results 1 to 25 of 43
Page 1 of 2 1 2
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event