As far as a compressor failure , anything can happen to any piece of equipment . Your have not seen and savings . This was a very cold year and fuel cost were crazy. If you spend the same this year...
Type: Posts; User: Big
As far as a compressor failure , anything can happen to any piece of equipment . Your have not seen and savings . This was a very cold year and fuel cost were crazy. If you spend the same this year...
When cutting an inch off the cap tube , do u change the dryer . If so a bullet filter or a regular filter dryer
Seems I have a system that has overheated. Any suggestion on how to clean it up.
I found a book "Starting with the end in mind". Maybe on Heatinghelp.com
I have replaced several units this year, and have been told of a 50%saving to 20% saving. Someone said replacing a 100 k 80% with a 95% 80k . What we must do is a simple heat load . Replace that 100K...
HeatingHelp.com go to find a contractor Good Luck
they choose the boiler by
Getting the SMALLEST boiler that covers the load on the coldest day
Use the lowest water temperature ( in this case a lot of radiation is good)
BUY the highest...
important ,you can do your own,on this site. Unico system need to make the sensible load , after you do the load ,you need to get the match of the condensing to the sensible load. So in many cases...
I always state that the customer get the chimny be inspected by a certify sweep
Rarely is the original heater the right size . Do a heat load and match the out put . I have replace a 125K unit with a 60k unit both with the same eff. NO LOAD NO JOB, tell them that . and look at...
Terracotta , if so no ,if not yes
at Thermal Pride
system gives you the SENSIBLE heat gain . If you need 27000btuh ,go with the unit that meets your need. 2 ton is not always 24k
2 stage equipment
Anyone have one?
did the heat load call for. My own system is a Carrier Infinity 3 ton HP . Though the load was 2 1/2 ton , I went with the 3 ton because it is 2 stage . The system is almost always in in the first...
around and listen
time you have such a problem, turn off the breaker
is what we install , but have install SpacePak also . The tech department at Unico is much better. We had a bad blower motor in a SP ,but we HAD to call for tech assistance (just to make them happy)...
a AHRI printout to see true ratings
To look at , would like to see a teck do a site ,Some suits just don't have ant first hand experience .We work with a few BPI most just talk thru their hats
tedkidd
Is there a link ,that explains the best set-back temperatures.
Should it be 4° or 8° F
The "new Hi Teck" system are reliable and safe . , most have a 10 yr parts and labor warranty available .
Your problem is choosing a company . I've been in business for 30 years and when I see...
A water feeder
is the fault code ,you are having.
have a number might help 1 800 513 9975 My book is to 1995
show ,sorry its done for the season. Makes Sunday nights boring
single or multi zone
systems have a 20 yr or lifetime on the HE . Look for extended warranties up to 10 yrs . They should cover parts and labor
systems have the disconnect as part of the unit ,that is all you need . If it not part of the indoor unit add one remotely
Insulate both line , I also added more insulation in the attic,actually doubled it ,after insulating the liquid line ,I insulated both lines together
sounds like a gas valve or pressure problem
to know is to find someone who can troubleshoot . I've never seen boiler piping clogged , to the point that it made noise. Did they check gas pressure or listen to the curc.
strong arm tactics in selling.You must buy today eg. The tea kettle sound may be the circulator or the venturi . I would call in another company
2 pipe
How true , the better the installer ,the better the system
understand U only get 11.5 seer
CARRIER
Possible route. Unless you are worried about the way it looks
Vibration Unit need combustion test and cleaning
Swirl plate You need to check venting its to close
NICE!!!!!!!!!!!
That is over sized ,hot gas will not even work . Hot gas is used to keep suction pressure and liquid from entering the compressor . This is done by a valve that senses low suction and adds hot gas to...
you can get someone to install a hot gas by-pass
Looking for one e-mail if you can help
My wife ,son and few friend were helping move the grandmother , her husband just died and they sold her home. There was a stack of red brick in the garage that she had to get rid of. As she stack it...
The call was something making noise ,when the air comes on . We opened the return and found nothing . We could hear it, one of the younger guys said he knew what the problem was . He reached over the...
Can you please e-mail me this info . I've been looking for it for years
How much
ARI rating.com