Search:

627851627861627871627881627891

COUPLE DIFFERENT JOBS FROM A WHILE AGO DAIKIN VRV SYSTEM 18 TON GEO WITH 4 CEILING CASSETTES AND 6 DUCTED FAN COILS AND ERV. OTHER IS OLD CHURCH RETRO NEW 30 TON...

So why are there going to be problems in the next 2 or 3 years and what kind of nightmares will there be? That's a simple system to work on! And happy customers don't call other contractors to work...

$9000

For any contractor doing handsheet metal layout this is what you need to speed things up. 3 year old machine in new condition
www.nitecinc.com

Aquatherm pipe it's all fusion welded

468291468301468311468321

No much just a little work from this week. 6 ton geo with radiant floor and hydronic air handler with zoned duct system. Bosch combo boiler for dual fuel heating rate and...

The equipment is not the problem it's the way everything is setup. I have done many houses with about the same setup, 8 to 10 ton ww with multiple air handlers and radiant. I have installed lots of...

All insulated piping is victaulic and steel pipe, only used aquatherm on domestic water .Insulation is fiberglass with PVC jacketing over top, I put jacket ting on a lot of my stuff it lasts longer...

To fill you all in a little better . We took out two old kewane boilers and the 2 300 gal DHW tanks that were hooked to them, also the constant speed pumps, old air controls and chiller that was a...

ok sorry i screwed up here and it end up being two posts. tried to get before and after on one

441921441931441941441951441961441971441981441991This is what i have been working on. These are before pics of boilers, air controls, pumps and air handlers.

I installed 6 new 599 boilers, 4...

This is what i have been working on. These are before pics of boilers, air controls, pumps and air handlers.


441821441831441841441851441861441871441881441891441901

Ya that source side piping is bad!! Going to want to check flows on each unit not piped right in my opinion

24 - 200ft vertical loops

Ya there's a few bucks there,also did exhaust system, airlines and plumbed pressure washer lines in wash bay. Building used for storage but mainly working on equipment.

I normally don't put any backup heat in but we added a 4500 cfm exhaust fan and intake in wash bay and 2500 cfm exhaust for welding hood after the geo was done so I put at electric boiler in for...

361221361231361241361251361261361271361281

ANOTHER FARM SHOP 80X210 WITH 25X25 OFFICE
2 12 TON W/W GEO UNITS, RADIANT FLOOR, 15 AIR HANDLER AND 28" 120' DUCT SOX FOR SHOP AC, 2 TON HYDRONIC...

Geosystems- hydro heat and econar has been purchased by enertech who owns hydron module mega-tek is Hydro Heat and i don't think enertech is making them any more thank god i used to put them in...

I do everything on my jobs piping ,insulation, build duct, control wiring.

319511319521319531319541

18 ton w/w geo system in farm shop. radiant floor, and 15 ton hydronic air handler with 28" duct sox to be installed yet. Smart pump with vfd on non pressurized ground...

30% of total system installed cost

Why didn't you use ductless heads with water coils means you have the w/w geo unit already.

Don't know if you got one yet but they are worth every penny. Ten times faster than screwing. I would by a new one, the new repeater pro doesn't screw the fasteners in like the old model faster and...

Thanks for all the great comments guys! Makes a guy feel good about what he is doing, I do take pride in what i do and what people think of finished product.:grin2:

most units you can run right through i think. I know the northern heat pumps i put in you can they are rated for domestic.

SKYHEATING
Thats the advantage of pro press copper fittings speed. piping only took 1 day, 1 day for isulation 2 days for duct, setting equip, wiring, purging and startup. Duct is easy I made...

I have a driller in the area that does all my holes. 99% of my jobs are vertical.

All insulation fiberglass, w to w units, the most versitle way to heat and cool. tank switches when they switch to cooling and all floor heat zones automaticly shut off so you dont have to...

NO CREW HERE JUST ME

a few finished up pics from another i posted before 16 ton radiant floor in shop and office 1 ton air handler for office 5 ton air handler for old attached shop and 10 ton air handler for new...

farm shop have been working on the past 4 days I finished up yesterday . I did all ductwork, piping and insulation . 8 ton geo radiant floor for shop and office. 7.5 ton air hander for shop ac and...

wow .12 kwh thats high guess i can't complain about what it is here .05 to .04 heating rate and .09 everything else propane is about the same, thats why it is so easy to justify geo

That is a good question typo or maybe they are saying it has to be hot or cold not both at the same time? They are for both though. I have put about 100 of these in and they work great along...

hung on rail suspended from ceiling with cable soc slides onto rail

You only need 1 buffer tank for your heating and cooling, all your radiant and hydronic coil will pump out of that 1 tank it will be either a hot tank or a cold tank depending on the season. you...

your cooling side wouldn't be oversized because your cooling the water in the buffer tank and pulling out of that to your properly sized hydronic coil on furnace. If you do 2 heat pumps use 1 well...

Couple of things, your not going to get 150 water out of a geo unit, you will run 115 to 120 and that is good for floors and coil, if you want less for floors just put in a mixing valve. If you go...

I do alot of retros just like this w to w the best way to go. get a hydronic coil to put on top of the gas furnace. size storage tank for 6 to 10 galon per ton get a B&D tank, and do everything...

Nice looking duct I have never seen it done like that before, looks like a lot of extra work. Done that way visual appearance im guessing instead of large grills?

I think that would work great, would be very easy to install in trusses, string a cable and slide sock on. you would want to make sure they design it for low flow or comfort flow, the other thing...

you're going to love this tool, have 3 of them I have been using for 6 years pressed thousands of fittings never had a leak, made repairs with water pooring out of the pipe. one of the biggest...

They do maitain static the entire length, its how they design them. In my other post geo job i have some pics of another part of this building i did. The air handler is 25,000 cfm and it had 36x60...

No its low velocity each outlet is designed at 20 to 30 fpm

TWO 22" SOX 80' AND 50' 4000 CFM EACH

Parker makes a water regulating valve that bases flow on freon pressure.

good work for first time and not having any equipment. If the school is going to teach sheetmetal they need some of the basic equipment so you can learn the right way. What are you going to school...

what kind of seam do you call that? No offense but what the heck are you going to do with that, hopfuly not getting installed.

SKYHEATING

I realy like using duct sox, they are so much faster than spiral pipe and they disperse the air much better. The other nice thing on that job was the ease of putting them up having to...

Yes I do all my insulation, when we do a job we do everything. Northern Heatpump units have been great! not a single complaint. They did talk me into trying one of their buffer tanks and...

Whats up with so many different brands