Search:

I sand off.

I'm looking for information on how to calibrate an old controller mod vcv2200-251. I want to check it or calibrate it before condemning it.

That would have been the first thing i would of checked.

For you to run into this frequently makes me believe you pissed off the a/c gods.

Our local pizza joint is making heart shaped pizzas for the 14th, guess im taking the wife there.

My first thought without knowing specifics, is you are low on charge. Verify proper charge.

I worked with an old timer that got a finger cut off by a fan blade and opted not to have it reattached because he would get more money with out it. It's a funny story now, but true.

I 2nd that. Send me a case . Ok i'll settle for a 12vr.

...and secondary power supplies not identified.

A good reminder to work safe.

Had some brisket today (costco brand) 7hours on crock pot nice and tender but verey salty followed inst covered meat with water. Any body have this experience?

I guess it depends on the unit. I've seen units with the same solenoid valve that are over 20 yr old and some that are replaced every couple years.

I would call traulsen tech sup with mod and s/n of unit to verify what compressor needs to be there and what refrigerant they recomend. I normally will use mp 39 with good success.

That made me laugh.

My last bag was from home depot, lasted about 2 1/2 years maybe 30,40 bucks. Did not care about tearing it up along the wall, but now with my louis vuitton i'm going to try and baby it. I know after...

Mine is only a couple weeks old , i try to pull it away from the wall when i do rope it up. That was a concern of mine since the bag was pricey. Will see how long it lasts before i tear it up.

So true about lugging 1/2 of your van on the roof right from the edge by your self. You have to force yourself to get used to the hieghts.It's part of the trade.Are you afraid of hieghts ?

Never heard of that .It sounds good, but i would think they pack them good enough to prevent that.Still like that idea.

They should of cut the copper tube the same size of the fuse just to make sure it could handle the load.

That looks like the fangs were there at one point.

I also saw that and guessed that's why there is xtra room on the unistrut.

I have one customer in Newport Beach California that has that style duct in their building.That is the only place i've seen that .Is that common in the Ukraine?

That ice machine looks like a subzero mod 506. I have seen that same style ice machine with a couple different brand names.Subzero still make that cutter grid.

Electric heat guns on large coils don't work very well.Hot water is the ticket.

I was thinking it looked like plankton from sponge bob. Still like it.