Search:

hey man how's that store looking so far. Did they tie a water tower to it or just VSR condensers....

I'm thinking this is a product issue and not a Refri problem....i have graphed these cases for over 5 days and its like clock work they don't hit 50* idk

The fans that are in this case are that ECM motor and blade combo they are black i forgot the exact name of it

yes it does and i don't lose any airflow at all. At first i thought my coil was frosting up right before defrost but that wasn't the case

not that i have seen or smelled

I have thought of that cause out of all the cases in this store this is the only line up with the issue. I have called HP and they have assured me i've got the right motor package

there is a staging area in the stock room where the conditions are good as well

Ok i got a 24ft line up of Beer( Hill O5DM Case) the issue that im having is i'm getting some mold on the Beer packages.
My case setpoint is 36* my rack is 404a +20SST. I've played with 3 defrost a...

[QUOTE=Pounds;15435531]Does anyone know the part# for the ribbon cable that connects the PIB Board to the main processor board?. Can't find # anywhere online.[/QUOTh
That's for an E2 is that what...

i use the cpc-637-4801 noise abatement kit

(R438a) is been used alot in the A/C conversions down here in the big supermarket chains and 407a for racks it was R422d but that faded quick..

agree with jp its an excellent 3 or 5 day class. Copeland is always updating there equipment and components

Agree 100% there 3ways are not very srvc-able

i have found the wires going to the 3 way valve or DDR valve with a short at the connector i have never had a bad control breaker your going to have to chase the common wire and see if you can find...

i have a cx that is not finding the fsd panel i have a cat 5. cable going to it now should the i.p on the fsd be minus 1 of the i.p prefix or the same as the i.p at the cx

maybe 407-c??

never heard of 507c i have heard of 507 and i have never changed gas on a ice machine if its been running on 507 why change???

i have an 88ao board that does what you have we have 2 cond set up's on the E2 one controls the ec motor with 1set of pressures the 2nd controls the standard motors with another pressure control...

so we're are using temp control instead of pressure?under the set up or are we using differential

thx for explaining it might have to try this

just a question phase.why would you want other circuits to run the float while the lead circuit is in defrost?when it comes out of defrost the float would be to high and now the that circuit is going...

if i understand you correctly if i set my suction stpt to 14# and my min on the float to 16# and my delay every 5mins at 10mins it will start to go up to 16# i think im over thinking this lol

i agree with you 100% the min. should match the suction setpoint for some reason i don't think the float app will not work if it doesn't match i could be wrong thats why i asked anytime i set one up...

we've been dealing with this problem for a very long time at one point T thought we were full of $*** now they just sent us 200 of those gaskets not fun replacing them either you almost need a troll...

ok i got a question that its been explain to me 10 diff ways:when setting up a float app.on an E2 or RMCC and your suction set point is say 14# now under float set up under min-max do you start your...