Search:

I'll definetly get some pics up. ASAP I was just glad that you renewed the drive to seek again. Got pretty burnt out on the first searches locally. Automakers split town and whats left leaves alot...

I would imagine the guts are the same, like the blu-vac micron gauge. Does it also come with the velcro or is it an either/or situation?

Just to clarify, the hoses I'm putting together are NOT the same as slctech posted. The hose is rated the same and the fittings are brass. I'll be adapting the ends as he did. Weatherhead/Eaton is...

Never heard of them. Might wanto purchase a known quality set first. If you dont see a thread on this site about them, my guess would be that build quality is less than stellar. If you already own a...

Thanks for the link. Finally found the right guy at the right shop. going to make up a 1/2" x 6' of the PTFE stainless braid out the door for $37. Just looking for dedicated vacuum hoses now. For...

GEEZ, that sure didnt work out as planned. Sorry bout that. Gotta run for now. Have to clarify later.

[QUOTE=slctech;15620571]



I also use a lot or loan out certain controls for classes. I am currently working on an economizer emulator and tester. You can see the gutted Annie Analyzer blue...

If no luck there you might try Hart&Cooley
www.hartandcooley.com

I've gotten the ones in pic 1&3 from them. Not sure bout pic2. I take it there's no ID on them.

With the smoking bans in force I picked up a perfectly good smokeater for $20. Got it off a scrapper. Going to go the 4" pleated for my shop. Need to see how the flow works out.

Valid point. I use it the same as teflon tape, stay back a few threads from the end. So far so good on my 1250's mounted on sherman

Definitly Nylog over Leak Lock. Tossed the LL after finding Nylog at johnstones.

Field testing of our new "Rip-Stop" fabric, will be starting soon!!

One micron per minute is the acceptable leak rate I go by. That info came from JoeyD or Jim Bergman cant remember which. Either way

x2

Did it come with any certification as far as calibration?

Mechacc posted a list of fittings and tubing a while back that covered just about every app you would run into. Purchased most of mine at local autoparts store. At least it covers everything I do...

Wasnt aware of expiration dates. I thought the moisture tubes needing to stay refridgerated (dry) till use was the only drawback. I was wondering if you couldnt just keep them sealed in a container...

Glad to see him on the cover,bout time. Looking forward to what he has to say about that screen on the tablet also. Good job Doug.

More like a prime example of a " Fixed Orifice "

I hear ya. one of the reasons I only do it for family &friends. Kenmore usually uses another manufacturer. ken washers=whirlpool refrig=GE I've run into kenmore parts that are outragious and been...

18-12-8. 8 comes in real handy if your doing resi rect duct for bending the lips over for the drives.

Pools, hot tubs, jetted bathtubs. Appliance repair if you can handle being a contortionist. Automotive AC. Those are some I fall back on when times get lean. One of the reasons I love this trade. I...

Might want to verify the water level is correct. Seen low water kill a few. I believe it should be 1/2 - 3/4 in. above element. Been awhile. If the old one doesnt have a board, I would follow Flanges...

There was a radio announcement that advertised a 1 day course for cert. @ $200/person awhile back, 1 day only. I've spoken with alot of guys doing gut-rehab and none of them have it and evidently the...

I'm with hvaclover, a compressive guide would be the ticket.

But then again I have to read, reread, think I get it then try to apply in the field and realize I don't get it and reread some more....