Type: Posts; User: jt47
Search took 0.01 seconds.
Lucky7777, from the dimensions you gave of the 2 old cells
(12.5 x 16 x 4) you would need 1 - 16 x 25 x 4 if you have enough pull out space. As previously stated,CFM of air flo is very...
Those old electrotstic air cleaners are good if you clean real good , such as in a dish washer, every 2 or 3 weeks.
The collector cell doesn't look dirty even when it is.
Your Trane elecro'filter...
Thanks guys for your thoughts on the centrifugal end
switch problem. I am surprised Coleman even used it.
Vacuum/pressure switches are cheaper and more reliable.
Now that Coleman/York are a...
Gotta question for you Coleman guys. I have a friend that
has a Coleman gas furnace (Model: #7681-8191/A Serial #: 980314787) that if it sits without being used a few days, it's inducer end...
Have any of U's had good results from using a slow release chemical drain pan treatment, such as Trains "Time-Release Pan Treatment"? 1-What product have you used that you know has made a notable...
The most important thing to know now is what kind of failure did the compressor have. The former problems were caused by the lack of lube oil on long, cold weather run times. The compressor would...
[QUOTE]Originally posted by x-pensivewino
[B]very funny!,off topic question about,..
"6-"Lets put the Condensate drain in the plumbing vent,
it will save time and pipe."
I'm a homeowner and...
I have a 410 R (R = remington)
multi-purpose ...has high pressure & superheat!!
[Edited by jt47 on 02-01-2005 at 10:13 PM]
A few Quotes & Sayings you may have heard.
1-"I can't see it from my house"
2-"If I was payed more, I would work harder"
3-"What is a Micron guage?"
4-"Whats wrong with panning the studs?......
The "radio controlled" switch is used to turn power off in
times of high or peak demands...when its real hot outside!
They get control of your cooling & maybe electric water heater. Like Sarge said...
Jt, You can go wrong with any of the major brands if they are installed and maintained properly. Especially if you get the 10 year parts and labor.
What are the major differences between the XL14i and XL16i? [/B][/QUOTE]
The XL14i has the recip' compressor but the XL16i
has the new staged scroll compressor... 16i has a bit more
Well, given the problem with the XLi16 would you go with the XLi14 or York Twin-Single? Thanks.
Don't know the York all that well but I think they use
the new Bristol...
Trane is having a "recall" of somesort, with the XLi16.
I heard a field rep.( with Lyon, Conklin - Trane Dist.
in your area and also ours @ St.Michaels) mention this
but not sure what the problem...