Type: Posts; User: geno54
So I did a search in the FSC Solutions Database and lo and behold....:)
Have replaced many due to improper installation.
First make sure the valve stem moves freely. Sometimes crud builds up inside
the valve and it gets stuck in the open or closed position. Tap the...
Could also try these
Honeywell Grey Manual
Here are some piping guides you could use
Tech Tips is now this
Dig around the Desert-Aire download area. They use JCI's controls for their dehumidification systems. Many manuals and point lists that may help
Congratulations on a worthy accomplishment
Yes that's the same thing that happened to me. Oh well
I would go for the Mitsubishi, because you never know if the dog has parties and all the other doggies come over from the hood and they start cooking and having a good time, the heat load would...
Here's a snow cone for ya. See ya in the spring. This is from years ago.
When I first started I was taught to open the liquid line and purge three times for one minute each. No need for a vacuum pump. Shortly thereafter I got educated and learned the proper methods and...
I would like to get a pic of my wife's face when she goes to grab a gal of milk in the morning and gets a drum of 410a instead.
I'm old school and have different sets for 22 and 410a
Do you use the same set of hoses for both or do you swap hose sets?
Worry about any oil/POE contamination through the hoses/manifold?
Started in 1970 in trade school while in High school. Looking to move up and become a "Fat Cat Banker".
No boiler was working fine. only a few years old, Had to ask her to move all the mess around the boiler and WH area though
I use brass fittings (tees, nipples, reducers, boiler drains, PT ports, etc) at the heat pump and then break down to whatever piping is being used (s40,s80, L). Have found it easier to work with...
Better off replacing the valve and if necessary the thermocouple and pilot tubing fitting and be sure. Retapping crossed threads on gas fittings is a bad idea even if the taps are available....
Have a Veto LC for a few months now. It is the best bag I have owned yet. More expensive. heavier but alot tougher. With all my necesssary tools it weighs in under 30 Lbs.
Be aware that if you buy a bag from HD or Lowes, those same bags may or may not be available after a few years. They both have a habit of making a run on an item and then discontinuing them after...
Fish Fear Me. Thats why they always leave when I get near the water. But I still love to fish anyway. Saltwater
Wasn't planning on getting a Veto but my other one wore out (from Lowes) and couldnt find anything with similar dimensions except the LC. Not too big, not too small and won't extend my left arm when...
Tough bag, good investment, will last a long time
I'm sure it was your house LMAO
Was doing a service call on a steamer and had to go down thru this to get to the boiler. As can be seen it was difficult at best to get to it. Not only that but the rest of the house was the same...
I wish they would go to single wire to reduce the complexity