Type: Posts; User: mardoman
Search took 0.02 seconds.
Thanks for your replies.
As I stated I've got a 18 year old restaurant with 18 year old equipment and they keep increasing the load by increasing sales and adding more appliances.
I would love...
That repair coupling may do it. The aluminum tubing is chaffed on the bottom row of the condenser. It was caused by the suction line coming from the reversing valve. The 3/8 insultube...
I appreciate your input guys but I'm still not getting it :confused:
Maybe I should start by giving you my situation.
Small southern coastal town. Growing population. Lots of tourists....
My customer has a TWA 048 Heat pump that has a leak on the aluminum condenser tubing.
I've never been able to solder or epoxy aluminum tubing. Does Trane have a factory repair kit? Do any Trane...
Thanks for your replies.
I'm confused :confused: Maybe you all can explain it so I may understand this.
one ton = 12000 btu......... is there a difference between High temp and A/C based on the...
What is the most correct replacement scroll compressor for a BRE-2-0750-TFC.
Two of my local wholesalers and Copeland advise using a ZB58KC-TF5.
After looking at the performance charts for both I...
K Fridge I hear ya brother, I agree. The dude at Copeland was adamant about opening the TXV all the way. I backed it off 2 turns on my final adjustment.
The dudes at Copeland had to leave early...
I agree with you Markettech.
Today the box was at + 40 when I did the restart.
This box has lots of bread in it and that seems to really impose a heavy load on the system. Another thing that...
Superheat...Bingo! You guys are correct......... yea, way too high. This was on a warm start-up.
Consulted with Copeland.... I mean Emerson Climate Technologies. They were very helpful. They first...
A Walk-in Freezer I installed back in '99 quit on me about 3 weeks ago on a Saturday nite. The remote can compressor was running, but the suction was high @ 50 psig and the head @ 150 psig and it...
I have never been a fan of nugget ice on a fountain/dispenser.
They are ALWAYS going to freeze up, or rather, the ice WILL fuse together in the hopper.
............But we have 10 stores with the...
Petrified gray door gaskets? I try to remove the door and use the restaurants' can wash area and clean the entire door assembly with hot water.
The restaurants around here are supposed to...
I always thought the finish timer is ( was ) a 10 minute timer.....7 minutes freeze, 3 minute harvest for example. I must need a new watch.
A bad compressor????:rolleyes: WTF? It is...
I believe the older Tranes' require a thermostat interface board ( $ 150.00 )
in order to hook up a standard thermostat ( $ 40.00 ).
That OEM programable zone sensor (T-stat) is $$$ ....
You haven't missed anything. These older Scotsmans don't make as thick of a cube as the current CM3.
The headmaster seems to be lame. The head pressure needs to be at 240 psig....
I need some help here on the coast. You may be interested.
Please check out my post from 12-13-06
I'm on the coast and have a position you guys may be interested in.
Please see my post from 12-14-06
Gee, I thought my chicken salad comment was harsh.:D
I may have seen this before. I have CRS.:confused: It may be your thermisters telling you ya got low discharge temp. Maybe a leak. Look at TXV cap tube chaffing on a refrigerent line behind...
If I recall this correctley an island hood open on all four sides requires 150 cfm per sq.ft.
A hood against a wall require 100 cfm per sq.ft.( open on three sides ).
Using your size : 17 x 4 = 68...
Bless your heart! I guess things must be slow in the great White North... eh?
I had to service the same model unit yesterday, same pressures.
All I had to do was degrease & rinse the condenser.
Please look at my thread in the junkyard forum for details :)
Ross 3 Barrell with remote C-Units (3)
1998 model 208/230v/3
Tecumseh hermetic 208/230v/3 ; R404 w/ U.L. outdoor housings
Equipment in V.G. condition
Available now in Wilmington, NC 28405...
Masterbilt Cooler/Freezer Combo
12' x 27' x 7.5' Floorless; Outdoor w/Durolast
Galvalume, Int. & Ext. 12' Partition
2-36 x 78 doors with peep holes, 14" x 14"; Left hand hinged
I've only got 28 pages of paper. Call them for e-mail.
The control board is covered in the manual.
The restaurant that uses this, don't program, they just hit quick chill.