Search:

Type: Posts; User: Zingnut

Search: Search took 0.00 seconds.

  1. NP Skizot, I will tell you that 30% of my...

    NP Skizot,
    I will tell you that 30% of my install will be over the $1500.00 tax credit allocated to me. If it was not I was going to blow in new insulation in the attic. I will wait till next...
  2. Yes, I had multiple sources confirm it was...

    Yes, I had multiple sources confirm it was certified for the tax credit.
  3. Signed for new replacement Heat Pump (Thanks to HVAC Talk Help)

    After 2 months of bids and narrowing down contractors and equipment. Then Wheeling and dealing for everything I could get, I signed for the replacement heat pump unit and air handler and it will be...
  4. I was told that the 39 will put out 2800 btu more...

    I was told that the 39 will put out 2800 btu more at 17 degrees than the 40 would is that true?

    ~Jeff
  5. Trane Recommended Air handler for setup, and IAQ ? for setup

    I have narrowed down my system to the following but would like your recommendations for the best overall airhandler for this system. I am more concerned with heat output in the winter more than...
  6. The main trunk is a straight 8"x18"x30', the runs...

    The main trunk is a straight 8"x18"x30', the runs are 6" flex to the registers.

    Currently I have 9 registers and will be adding 3 more to the system in the next month. So a total of 12 registers....
  7. Man J Calc 1 company says 2 ton & other 2 say 2.5 ton

    I am having my heat pump replaced, it was a 2 ton seer 10 RUUD. I have had issues with heating in the winter (could not maintain over 72 degrees on cold days but not for cooling in the summer.
    ...
  8. Replies
    1
    Views
    596

    TCONT803 Vs. Vision Pro IAQ

    I currently have three companies I have narrowed down from 10 for a first floor Heat Pump replacement. I have come up with the following system from all my bids to be the best bet for my home. My...
  9. Ryan, Thanks for the fast response! The...

    Ryan,

    Thanks for the fast response! The three companies did do load calcs and can up with almost all the same setups compared to the other 7 companies which were over or under in the sizing. My...
  10. American Standard Heat Pump/Air Handler model #'s needed...

    I have narrowed my selection down to a Trane system with the following models number:

    Air handler 4TEE3F40B1000A
    Heat Pump 4TWX5030A1000A
    Heater BAYHTR1415BRKC
    TStat TCONT803
    ...
  11. Replies
    2
    Views
    1,025

    Bryant Preferred numbers needed

    I have a bid right now for a Bryant unit:
    Preferred Series 14 seer 2.5 ton heat pump with standard indorr fan coil, or with a variable speed coil for an extra cost.

    The individual gave me the...
Results 1 to 11 of 11
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event