Search:

I pulled it down and fixed my faulty install of LL drier,still have a choice of MP-39 or 414b,unless I pay for R-12 myself( I can get 12 oz cans from a car ac parts place,$110 my cost)anyway what I...

I had the fluke 16/322, but now have the fluke 16,pipe clamp and the 334 thanks to all of you and the thief.

I got my truck back was 50 miles away and they took all my tools and did 3500 interior...

I noticed sears has benders on the web site ,anyone try these ?

Also finding out that the room a 15x30 approx size had roughly 10-20 people in it and now there has been a wall moved to bring the room up to 25x30 with 30-40 people in it.Trying to get them to...

These units are rheems handlers with goodman condensers.
Both are ancient,meaning about 9 yrs old + . I can't even get them to consider changing both units out,they can't understand any logic but...

I wondered which of the 2 would be considered the worse choice
Under size on condensing unit
or
Under size on handler

What would be deemed o.k. size wise ?

The reason I ask is I have a...

Here is something I found on fluke that might explain better;

http://www.fluke.com/Download/ElectricalPower/1629920_.pdf#search='inrush%20current'

I walked out of a HD to see my truck driving away.
Anyway these great guys decided to take both my tool bags and I get to start over with new tools. I est I lost about $3,100 in hand tools. When I...

I guess I will have to do what is needed,I am unable to move the unit and most if not all my work has been done using mirrors as the ceiling above the unit is only 15" higher than top of unit.But...

I had to use the 414b as my boss wouldn't submit for another tank.

I really wish they made like 5lb tanks of this low temp refrigerant.

As for the LL drier, I will have to remove the condenser...

That was my problem, the LL came off condenser at 1/4" up off base of unit travelled under fans/shroud about 6" and straight into metering device,unless I was going to re-design their device I had no...

I went and was unable to find either ,but this email came in from Emerson
Good Morning,

The information you are seeking is available through our Online Product Information database. Please go to...

I did add a filter drier 082 size, did the triple pull down to about 350 microns,used nitrogen while brazing.I cleaned both coils and re-attached fan shroud,even washed off the fan blades. I will...

I had a 30 yr old Traulsen reach in freezer 3/4 hp semi-hermetic that needed 2 new service valves and a defrost timer.I have about 20 lbs. of MP39 and went off to local store to get sevice valves and...