Search:

Thanks, I'll try that as soon as I can. Was hoping someone ran into this on a Summit system. I have ran into other quirks on the Addme's and Summit with inputs but figured that out. First time I...

I realize there is no SNVT_binary and I do have in Summit the point set as SNVT_switch. The manufacture states that the state sent from Summit must be 'true' and value must be greater than zero for...

Rover checks the windows key for generation of locking code. Different windows key, different locking code. Every time you upgrade your PC you have to call Trane (And get redirected a 100 times and...

I have about 8 AddmeII controllers from Control Solutions and have been using them for a while for analog inputs only. I recently needed to use the binary outputs on one of them so I proceeded to...

But after you use your 30 days then the next time you have a problem, your dead (Unless you bypass BASregistration:)) I now properly backup my entire drive weekly by imaging it to another drive of...

This is the reason I did what I had to do. I had my system running with ver.16. I had two hard drives. One was the main and the other was a backup drive which was drive imaged from the other drive....

There are way's around this!:D

I work in a company that has 2 main buildings. One has Metasys and one has Tracer Summit.(The latest versions) And i'm the one that works on them. Believe it or not I have to go with Trane. There are...

This is the cheapest place I have found for controllers.
http://www.csimn.com/
And they work great!:D

jaggerdss@hotmail.com


As far as your BCU jtricor is probably right as far as the memory card. At this time the standard cap card is about $950. What does the display read?

I have a Liebert CRU in our ITS building and I'm running Tracer Summit for the rest of my facility. I only have a relay hooked to the Leibert tying it in to Tracer for alarming.(Tracer pages the...

Are you trying to use the modem in the workstation itself? Or is it in a BCU as it should be?

Dowadudda, If you need the pinout for the upcm cable to make your own and save $90. Let me know. I have made my own. (Very easy & cheap) Also I have a copy of UPCM and PCM edit and can give you some...

I have had that same problem in my facility with the smaller Belimo valves (LR20?). A rep from Belimo came down and told us that there was a run of bad actuators and he is currently replacing them as...

There are easy ways around this all the way up to the latest version 15.