Search:

Type: Posts; User: pecmsg

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    17
    Views
    199

    Mixing refrigerants is just wrong. The /R side...

    Mixing refrigerants is just wrong.
    The /R side has been dealing with this for a long time; the A/C side is just beginning.
    When in doubt pull it out
  2. Replies
    2
    Views
    17

    Why? Generally there’s not enough in there to...

    Why?
    Generally there’s not enough in there to justify 240Volts.
  3. Replies
    8
    Views
    155

    Cap tube and X-Valve?

    Cap tube and X-Valve?
  4. With vague information we cant answer.

    With vague information we cant answer.
  5. Replies
    8
    Views
    155

    What valve and 0* SH?

    What valve and 0* SH?
  6. 3 hrs is fine

    3 hrs is fine
  7. Please Do Not change the design of that unit.

    Please Do Not change the design of that unit.
  8. Replies
    13
    Views
    396

    Ask the hall for the list of contractors and call...

    Ask the hall for the list of contractors and call around.

    You gotta give it some time its not the middle of the summer you know.
  9. Replies
    11
    Views
    204

    Oil logged condenser?

    Oil logged condenser?
  10. Replies
    9
    Views
    221

    I wouldn’t do it. Was the compressor...

    I wouldn’t do it.


    Was the compressor purchased from the factory? Only use OEM parts on ice makers.

    How do you know what operating pressures to look for? There not going to be listed in the...
  11. Replies
    10
    Views
    336

    In that case Good Luck

    In that case

    Good Luck
  12. Replies
    16
    Views
    408

    First all the valves should never be 100% closed...

    First all the valves should never be 100% closed at the same time.
    If the BMS is controlling the valves and pump(s) simply have it raise the CHW supply temp when 70% of the valves are closed.
  13. Replies
    7
    Views
    191

    Start up noise is often due to the installation...

    Start up noise is often due to the installation of the unit.
  14. Replies
    7
    Views
    191

    Thats a good question.

    Thats a good question.
  15. Replies
    7
    Views
    191

    Contractor Locator Map:...

    Contractor Locator Map:
    http://icemeister.net/aop_map.html
  16. Replies
    13
    Views
    460

    I can do it for 12K

    I can do it for 12K
  17. Thread: Experiance?

    by pecmsg
    Replies
    8
    Views
    314

    :grin2: :whistle:

    :grin2: :whistle:
  18. Replies
    5
    Views
    210

    Why was the fuse blown?

    Why was the fuse blown?
  19. Replies
    10
    Views
    383

    Try this

    Try this
  20. Thread: Traulsen g12010

    by pecmsg
    Replies
    9
    Views
    302

    Limit no good Heater no good relay no good...

    Limit no good
    Heater no good
    relay no good
    burned wiring.

    could be several things
  21. Replies
    36
    Views
    1,166

    Agreed needs more then one layer and seal all...

    Agreed

    needs more then one layer and seal all the joints.
  22. Replies
    36
    Views
    1,166

    That’s Bubble Wrap i like it better then FG...

    That’s Bubble Wrap i like it better then FG easier to work with.
  23. You found a tech that owns and used a vacuum pump...

    You found a tech that owns and used a vacuum pump and a micron gauge. That’s good enough
  24. Thread: Short Cycling

    by pecmsg
    Replies
    33
    Views
    983

    :gah: :pop:

    :gah:

    :pop:
  25. Thread: Traulsen g12010

    by pecmsg
    Replies
    9
    Views
    302

    Good Luck

    Good Luck
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event