Search:

Did a full cleaning and dusting and wiped off the flame sensor. Alls working just fine now. Starts right up with one push of my remote :)

I have an older model Heat-n-Glo system Model 6000DVT. It was installed by the builder when I moved in my house back in 93. Sad to admit, I haven't done much with it as far as servicing over the...

OK, so in addition to isolating the lineset, I stuffed some fiberglass insulation between the lineset and my ceiling. This lowered the noise level to a managable level that I can live with. I surfed...

Where can I find vibration limiters?

OK, I turned the a/c on inside and then went outside and dropped the breaker to the a/c unit. Came back in and heard no hum noise at all.

OK, I removed the remaining holding clamps completely decoupling the lineset from my house framing. That reduced the noise a bit. Would wrapping the line in additional padding help any or is this...

Any tricks of the trade to quiet it a bit?

The lines were not replaced, however one thing, I thought lowered the sound just a bit, I removed the line-set holding bracket that secured the line to the floor joist. I thought it was vibrating...

Hello all. Glad to be a new member of the site:). I have a 15 year old York furnace, mod#P2MPD14N08001B 115v-1PH-60hz. The York A/C unit was replaced about 3 years ago with a Frigidaire FS5BD and...