Search:

We use the Samsung galaxy tabs as well they are great, take pictures email my self so I dont' forget to do my orders when I get home. have manuals and whatever i need at hand all the time:cheers:

I dont' mean to be a misfit but I am a HILTI fan myself.

I second phases motion he is right on

I have used one for years , never had a problem with them, but mainly use them for true boxs and manitiwocs as others have mentioned.

3 pinch off tools to change a headmaster? why didnt' I think...

Got a call late one evening on my way home, a tech had been out all day to replace a 3 phase compressor and couldn't get it to run,(i thought he probably has it wired backwards okay i will go out and...

I would have to say:

JUNK

That's about the gist of it

I have never heard of drilling a hole in a true accumalator either. AS far as the small can of 134a 12 oz's is too much if the unit holds 8 ozs each 6 ft hose should hold 1 oz each so you would only...

that is beyond the saying: Welcome to the wonderful world of refrigeration.
Was some one there to pick you up when you first saw it? :grin2:

If the evap is missing nickel, I say hack it and get a new one. 14 years is a good run for an ice machine.

The ECM do run backwards on occasion, this always drives me nuts and is a pain when power goes out late at night and comes back on and I get a 2 am call that the temp is going up. I have not found a...

Sounds like your bin switch, it will harvest 3 times and when the board has to take itself out of harvest 3 times in a row the unit shuts down, then you have to reset the power or turn the power...

Pay me now or pay me later is what it boils down to. As the others have asked are you staying in your house for awhile? if yes then you are better off replacing the whole system.
Are you selling...

I've done this twice and it never works out for you, companies do it because it works in their favor, I never got screwed but they don't want to pay maint. costs and complain bout using too much gas,...

definitely check the t'stat setting, it is also possible that the personell are leaving the door open during their work hours if the gaskets are not bad, t'stat setting and door open or bad door...

agreed, will have to change drier, change or clear cap tube.

My vote goes to your tech no. 2 as well, i've had this happen on occasion i've even gone as far as pulling the coil and charging it with nitrogen and immersing in water and found numerous tiny holes,...

I didnt' see where you checked or changed the start relay, I would do that if it doesn't help then I would megg the compresor.

Ummm yeah could be real bad but dont' have enough info on what you are referring to, alot more to a retro fit than just changing refrigerant.

This has happened to me after watching the gasket smoke and melt I did some research and found out that the wrong heater was put in, my info at the time stated that the door heater should be 6 ohms...

Thats the best advice, most ice machines are considered a critical charge and hard to get right if you dont' charge by weight.

Alot of people do that to reduce the heat load in there area, not sure of the heat rejection on a little undercounter cooler but an undercounter ice machine could have 9,000-12,000 btu's heat...

not sure what exact model your working on but the high limits do that to me, they were on older models and the high limit was in the back on the top and the wires would break of due to wear the the...

I'm not sure which type of defrotst timer you have but the compressor should shut off when in defrost and the evap fans should shut off, if it is a paragon timer (old type) 3 is defrost and 4 is...

The best way to get out of a bad situation is to not get into one in the first place. I would of walk away as well.