Type: Posts; User: installer 123
You need the Vision Pro 8321 for a dual fuel Heat Pump system, not the 8320.
The Tcont803 with an outdoor temperature sensor will control a dual fuel system just fine.
[Edited by installer 123 on 12-03-2005 at 11:35 AM]
It should not be a problem to install the intake on the top of the duct. Check your system again, this should be conncted to the return duct, not the supply. If you do not have the tools or...
It should not be a problem to install the intake on the top of the duct. If you do not have the tools or supplies, any contractor in your area should be able to do this for you.
Do you have a straight Heat Pump only, or do you have auxillary heat (electric, or gas)?
If you have a single stage furnace, or electic heat with only one contactor, you need to have a jumper...
I prefer Play Dough. The home owners can pick different colors to match the siding!
Oops, this is the refrigeration forum, stick with the Silly Putty!
[Edited by installer 123 on 05-06-2004 at...
Just a Test