I start with P=15 I=1 and 50% bias. If I need to slow it down more I go the tenths like .8 . The trouble I find is no deadband, the output always changes even it by .01. If there is a long lag on...
Type: Posts; User: Jay_T
I start with P=15 I=1 and 50% bias. If I need to slow it down more I go the tenths like .8 . The trouble I find is no deadband, the output always changes even it by .01. If there is a long lag on...
Thanks, I get those file on the balancers laptop.
I am trying to launch the config wizards for a vav controller. It is to help the balancer. Normally we install smart sensors and the balancing is done there, however these boxes have flat plate...
Can this be done? Much like the old Honeywell XL10 wizards. When I try, it throws an error cannot find client path. The client path is the Lon folder on the laptop with workbench. I tried to transfer...
Maybe "Simply VAV"
When I did this, I was able to get the points in by changing the points to network visible, however the setpoint could not be change at the Jace front end. When I discovered a setpoint and configured...
What about...
In= config
Of type= Numeric Point (or whatever)
Match= All
displayName = ZnTmp (or whatever)
This worked for me. Also make sure the wizard service points to the correct directory on you computer. I had an issue with my 64bit computer and having to install workbench and the wizards in the...
Yup, EasyIo will fill your request.
I was trying the easy way, it throws back 5f instead of 95. I will try it with the program object. Thanks.
Is there a way to convert the Address in a BacNet device from Hex to Dec to display on a PX page? I have a bound label and can only seem to get the Hex out of the properties of the device.
I jumped through all the hoops and got help from other posts regarding issues on newer Distech Wizard Service. I do have one reaming thing I can't seem to get working. I can not create points and I...
Thanks guys. I installed the 32bit version 5.2 up from 5.0 and the weather service works.
Looking at this a bit more, it looks like the trouble is with the Weather Manager View.
Works with the EasyIO workbench, not the JCI.
Here is what I have going on with a Win7 64bit laptop-
JCI Workbench installed in the 32bit directory
Easy IO Workbench installed in the 64bit directory
Both are the same niagara version
...
I don't believe you will get much out of the 15c without the Honeywell AX Wizards. Not sure if the wizards run in any brand of a jace, or only honeywell ver.
Has anyone pulled this directly into a Jace through Modbus? Was it straight forward or a mess? Thanks.
I was looking for a long time. We do use our past jobs as a yardstick, this one however is an part integration. That's why I started looking into the estimator. I guess I will push for the next size...
Ran through this tool and came up with a kRU number. Now what? The only document I found was from 2/2006 and it was talking about a 201 with a resource limit of 450 or so. Any ideas where I can find...
I have seen what Jason has stated.
It this done with other zone type controllers. The zone controller becomes a "floater" no vote. Because these zone controllers use a supply air temp sensor, it...
The default view for the history point list is live history chart. The user guide states -
The default view of this component is the Live History Chart view. The property sheet view is where you...
Thanks for pointing me in the right direction. Haven't been on site, but will try this.
I have a Jace running a house and have a PC and mobile interface. When connecting to the internal IP, I would like to set it up so the customer can one click in. The external IP of course would use...
Correctamundo!
I got it I think. I found NumericCovTotalizerExt in the Vykon module. I then linked triggers and a schedule to it to reset. This little thing was driving me nuts all morning.
The are looking for the BTUs through a solar heat exchanger.
Only in an Excel spreadsheet. They want that duplicated on the front end.
I need to create a dashboard displaying BTUs through a HX. The customer want to see hour, day, week, month totals. I am familiar with the calculation, however I can't seem to figure out how to...
For the ones I have opened, the customer had to request it and pay for he license upgrade. From the service they were receiving, they were happy to pay.
It really depends on the system. I think I remember following different logic loops in LonSpec and seeing inputs were clearly missing from some blocks. Lonspec of course learned the block and the...
Cool little project.
It has been awhile, but I don't remember being able to upload referred points in LonSpec. The last time I uploaded a site, I had to redo them. Once you do any commission to a controller, the links...
Thanks for the input guys. I may need a lot of points, the goal is to use these as strictly point servers to get to the N2 devices. All supervisory programming would be moved up to the Jace.
I am not sure, I was told they are about a year old. I won't be back on site for a while to check, anything in general to prepare for?
If a site has a newer NAE, running the current software, with only one trunk N2, is there a limit to the number of BacNet/Ip points it can server up? Any limits on number of read points vs write...
You are going to have to ignore one on your slave device. It is clear how to tie into your master device. If the terminal are not designated on the slave device, in about 6 tries or so you should...
Easy I/O, no VAV option.
JCI LX series, which is re-branded Distech.
Anyone here use this controller? Anyone use the Single Loop PID? I have two conditions with it.
1- Maintains perfect setpoint, however when set point is lowered, never hits zero.
2- This is...
Worked perfect. Thanks.
Anyway to change default count on all trends at once? Tried with Vykon tools and program service, no luck.
Got it working. Thanks for the help guys.
Thanks guys. Been trying different versions of these. The bit of trouble I am having is the not part. When searching by display name or name bql doesn't seem to process the not.
I have a site that the zones points were named as follows-
Zn1Tmp
Zn1StPt
Zn1FlrTmp
The Zn number changes accordingly.
I am trying to pull out just "ZnTmp" with BQL, I can't figure it out....
Verify the "System Control Command" is set BAS control
Verify you are writing to the "Economizer Minimum Position Setpoint BAS" and the points out of service property is set to false. This...
Thanks. That is what I was missing.
Here is what I have - loop point (PID) output to an analog out 0-10vdc.
The loop point outputs 0-100, the analog accepts 0-10.
I tried a linear conversion on the analog point, got an error...
Is it an issues with all devices, or a couple? You rebound links, what about recommissioning everything and then rebinding?
My deepest sympathies and prayers are with you.
Thanks for the input.
I have always practiced turning over to the customer all they need to be as self sufficient as possible, I believe they paid for the project including the programming.
...
Who owns the program in a programmable controller?
The contractor owns as "proprietary intellectual property" or the customer for purchasing?
I have seen specs where it is specified that all...
If you discover the Ipak in workbench, it should pick it for you. It should be self documenting. A while back I integrated a trane that was from around the turn of the century by just discovering it....