Search:

I wanted to contact the company but my mother in law asked me not to and she did not give me the tech's name.


You are correct, coming here really doesn't serve any purpose, I guess I was...

lenox furnace, i priced the board and it was less than he charged for the first service call.

Original service

I agree that he can easily jump the T stat from the furnace, but he can not get 120Vac to the furnace with both switches in the off position. He never turned the emergency switch back on at the top...

There was no need for any further repair. The replacing of the capacitor fixed the problem. The board was not bad. The door should have been put back on the power turned on and the t stat set to...

My mother in law was ripped off by a local a/c repair company in New Jersey. This is a large reputable company that came highly recommended.

She called for service when her central A/C stopped...

While i am not an expert by any means i do have an understanding of HVAC and I was a little concerned by the numbers that i was given. I would have thought the superheat should be around 10 and the...

Beenthere,

Thank you for your understanding and support. I thought i had provided all of the necessary information but see that i left out the pt information. I have read many posts here and its...

Thanks to all that tired to be helpful. I am sorry i forgot to post the pt numbers but i thought i had posted all of the relevant information. the pt on the liquid side was 100 and the pt on the...

Wow, 89 people read this post and no one has a comment?

Tech came out to do annual service on our heat pump so i asked him to provide me with the numbers from his inspection.

the unit is a goodman cplt42 with a capf 060d2c cased coil on a gmv95 gas...

Between State and Federal funding about 70% of the my cost was re-reimbursed.

Since the State of New Jersey as well as a lot of states mandate that a certain portion of their energy must be...

We do not have any battery backup. In New Jersey there is net metering, so what ever excess power we generate during the day just spins the electric meter backwards then when the sun goes down we...

I am proud to say that my wife and I live in a Net Zero energy home of just over 2800 square feet. Between our 10kw solar array and 2.4kw wind turbine we generate over 15 Mwh a year of electricity. ...

Looking at the PDF file this is the worst use of a 190 watt solar panel I have ever seen. Based on the brief description in the pdf file it would appear that the only time the solar panel is...

Thank you for the reply, Peco is a no go since we are in philadelphia and serviced by PGW, the tag credit I was aware of but not the Keystone helps.


Carl

I have been doing some research and I am a little confused. While I can find and understand the Federal tax incentives for the installation of a high efficiency Gas furnace and I can find...

How much air are you moving over the A coil?
What is the blower speed/CFM set to?
If your blower is moving more than 800 CFM the blower speed is too high.

I also live in New Jersey and we installed our first 7kw system in 2004 and an 1.8kw wind turbine in 2006 then another 3kw solar in late 2007.

We use an air source heat pump with 15kw heat strips...

Take a look at this site. The person there is Bill Fitch. He is really into solar water heating and has vast experience in the field. He is a distributor for several models of evacuated tube...

If you live in the state of New Jersey, the New Jersey clean energy program is offering a comprehensive energy assessment of your home for the sum of 125.00 dollars. This assessment includes visual...

Beenthere,

You are correct this did not come from the factory this way. But I believe any competent HVAC Tech or Electrician could do this although it may be cost prohibitive since it would be...

Is there such a thing as a system that uses all 3 fuel types? In other words use the heat pump as the primary, electric strip for additional heat down to a certain outside temp, and gas heat for...

What is the air temp before the coil?

If the furnace runs good for the next week or so. You may want to have your electrician make sure that the connections for the furnace circuit are good at the panel box. Have him check the hot the...

Did they check to make sure you had a good ground?