Type: Posts; User: CODYKING
Search: Search took 0.00 seconds.
07-07-2010, 04:01 PM
I suppose it does weaken it, but it doesn't make any difference because after I evacuate the system I cut the stub off behind where it was pinched and sweat the same valve in there install the...
07-07-2010, 12:44 PM
I always use a pinch off tool and braze a fitting in on the process stub.
In most cases if the unit is pulling proper amps, then it is caused by a bad connection. Could be bad crimp, loose terminal connection to spade. Did the last guy replace the wire or just cut it off...
Hey guys I went to look at a ice box last night (freezer) that sits out in front of my buddy's store. The ice was melting from about half down to the bottom.
The condensor was completely stopped up...
They are different brands, I have already told him that a alkaline based cleaner was not factory approved and that we would not be responsible for the evap plating. He still wants a MSDS on a...
I have a customer with 25 ice makers and he refuses to let me use a acid based cleaner. Does anyone know of a alkaline based ice machine cleaner?
I have a old Sharfen Buffalo chopper the safety lever came loose and busted the switch out and jerked all hte wires loose. It looks pretty simple but I'm having trouble on how to wire it back up. I...
Results 1 to 7 of 8