Type: Posts; User: swift one
Quite common here if your talking about a utility bed on pickup truck. Ford, chevy,dodge etc... fleet sales at any dealer can find/outfit for you.
with r12 likely unnecessary,more so with 134a(cap tube replacement)
The same problem i had this past summer with 2 true reach-in freezer (3door and 2door) I replace Defrost timer, only to be called back. Thats when fumbling around in the center electrical panel the...
Marvin was a true friend.He forgot more than i'll ever could hope to know. Brought me up in this trade always asked how my kids were doing. Loved you Marv. R.I.P Thank you.Will
This may help/ or thought If this unit has a baklite blower terminal block in the blower section. remove/ jump around it. Had same problem years back. With a trane gas pak. If memory serves me...
I did two this past summer 1st was a down draft most expensive 5ton curb ever. 2nd was side draft on a stand made of angle iron.and a huge transition. Had curb mfg come out and measure. made it very...
My 2 cents tells me there is a part/chunk of the valve reed floating in the discharge line in a bend/90 cut into that dude.
Change power head. Usally the problem. Under the insulation you will find it badly rusted. Also readly avalibale at supply counter.
JPSmith right on man. We all live with mistakes. Human.. no question. To live crooked eff them eff them all.
Man you would lose weigth running service in a black anything.. in Texas
Changed filter driers back blew through evap/cap tube. both up and running. usually the nomanclature on comp- are discolored when comp- have suffered hi temps/press. both driers were restricted.
With this model why not run refer lines back up the middle of the case w/the drain line.Just my thinking. Hence when you pull the cond- unit there is a real possibility of a kink.. Too the point i...
I like it for first install. you should be a proud man about it too.
Replacing the door heater on a double dr reachin is this an easy task do doors have to come off.looks to be very involved,any help thanks.
I like finding a pair of glasses and flashlight lol
Heard those expressions for years.Never quite understud terminology.
Is their a thing or where as, of soft ice and hard ice? Only when it comes to evap coils, and what are the tell tell signs.What is HEAVY frost. What is HARD ice. Things that make you go humm. OR...
I did one several years ago( after setting of new head) Had to remove comp. dump water and oil removed tev drier etc.. repiped warrenty cond-to evap and vacummed for a day or so nitro,vacum...
Thankx gents I got the go ahead to make the repairs leak found at tev equal. line.
Need some help. Larkin m#mt310 evap. new cond- unit Cope m#FJAMB500TFC020. First is this properly sized. We are in North texas (DFW) looks like new tev??? can't see valve covered in heavy...
Yeah man got to get her to behave.
the problem was the liq. sol. picked-up part today and installed.Unit shuts down on low press cntrl. after sol. deenergizes. used pinch-off tool to be sure.thanks for your response.