Search:

:-)

Yeah, probably. I'm pretty comfortable with the gfx stuff though. The lon and AX part of that 2nd week shouldn't be too bad then, and outside of learning the BacNet side, the overall...

I'm going to be taking a Tridium course, also. However, I'm doing the Distech-sponsored Niagara course in Atlanta in March. I'm also staying the 2nd week for their gfx training so we can purchase...

Their original front end was VI. They had a major power issue which took out 12 controllers all at once. We replaced those with Distech and put in an iLon. At about the same time, the power supply...

No offense taken, I understand your point. That's what I'm trying to learn. I appreciate your help.

I don't blame them for protecting their intellectual property. I was just under the impression that plug-ins were readily available for most lon vendors, so I've been surprised at the difficulty...

I understand what you're saying Amigo. My exchange with Circon never touched on the quality of work, etc. I explained that I had a customer in which we service all of their buildings, one of which...

I have been in contact with someone at Circon because a job we service has their equipment. We are not a Circon vendor, but are able to service any Lon network. When asking about acquiring their...

Thanks guys for all the help/suggestions. It is clear that this equipment is not supported from Honeywell anymore and we don't have any old (working) laptops and SLTA connections laying around. ...

I understand what you're saying about the E-bus versus Lon, but I am able to create a network in LonWatcher and connect to the devices with the standard Lon Browser.

Also, I downloaded RB4 and...

I've got a building that has a bunch of W7751's. They're v1's (1.02.13, date code 2001) and I've been told that both the commissioning software and the compatible plug-in are both unavailable. I've...

You'll need to update the iLon first. What version is it? When you go into 'Standard', after everything loads, there should be some text towards the bottom-right of screen above toolbar; i.LON 100...

Well, got the Trane equipment back; Lonwatcher must have changed the ZL. Had to do a Rebuild on the Summit and re-add the 581's. Their version of Rover is 5. I couldn't find anything in the book...

I commissioned them in Lonwatcher as a last approach just to prove to myself that the network was okay to true Lon standards. Without any of the devices configured in Lonwatcher, the Summit would...

So, this Trane "Lon" thing...

Trane likes their Comm5 to be daisy-chained, I get that (now). I needed to add some RH sensors to a network and used BAPI L-Combo. Ran a star-config on the sensors,...

The need basis is really my dilemna also. I'm going to be putting in a Lennox Signature 2-stage HP with variable speed air handler. I would like to throw in a Lon network and put a Distech ECP-103...

I've got a few Circon controllers on a job and I even have the plug-ins (supposedly) that I pulled out of the NI folder. The 2 files I was found were BASICPlugIn and Circon3xxPlugIn. The...

May not be using correct terminology, but I'm calling Standalone on an e3 similar to that of a Smart, as in no front end server being used. It is just (1) 100 and 3 L-IP's, one router for each...

I was actually able to get it back. At the time, I was getting a WARNING when rebooting via the console that there was an issue with the shutdown process. It would otherwise reboot normally and...

I was trying to downgrade an Echelon Smartserver 2.0 to an e3. This was supposed to be a quick job and I needed to turn the graphics around quickly and didn't really have the time to work with a new...

The trends or alarms are not being monitored by the customer in the first place. The schedules I'll have to look into.

Wow, thanks, I'll have to try that. I just didn't like the idea of sitting in the customers office tinkering or I would have been apt to try it on my own. This gives me some things to try. I...

Can I add the Distech devices using VI? I've extracted the db from the NI folder and created it in LonWatcher. I'm wondering if I would be better off creating the devices in LW and then adding the...

We have a service contract on a job with Circon. They had a major power issue and have 2 AHU controllers and 10 VAV controllers to be replaced. My experience is with Distech and I'm wondering how...

Holy crud buckets, y'all are fantastic. I've been struggling with the same thing on an older job that I've been trying to tweak. I never realized that the FAN_IN_AV was an internal calculation of...

I have a similar problem that I have never encountered before. Dapper's answer may be the same, but thought I'd throw it out there.

I have 4 or 5 Distech RTU-L's on a network of like 25 attached...