Search:

Agree good debate. If there is missing tube insul in a hot attic and additional refrig is added, your head would also increase. I like what the said, charge at condenser but take a look in the attic...

I used it once on a truck. It lasted almost a year then leaks poped up in the seals on the compressor. Ended up having to flush the system three times to get it out then replaced comp, reciever,...

The icm 325 is probably most often recommended but ranco and supco also make one. Those are simple to install with a tee. Also not very expensive.

Replaced filter a few months ago tells me that it may need to be replaced again. The expensive ones are very restrictive anyway and I rarely see them get the 90 days or whatever they claim.

I have had nothing but bad expierence with it. I will never use it again. Remember some leaks are caused by vibration and rubbing on something. Some took a while, but most had compressor failure...

Good ole BC powders for me. About twice a year my back goes out, then it's cortizone and pain for two weeks. Hell I even have to make sure my back is straight when on the toilet. I work alone also...

The glass jar at the regulator catches most of it. I have painted 4 cars with the same drier and still have it. I do realize the pressure is alot lower although.

I paint cars occasionally, using a regulator with a glass jar plus a drier inline to keep moisture out. Not that I would use air but a drier would remove moisture.

Oxy/acetylene is my pick. Although I also use mapp gas and staybrite in the attics most of the time.

Are you using references?

All I use is staybrite#8 on txv. I slip the pipe in slightly then flux. This helps keep the flux out of the system. Solder doesn't like to flow where there is no flux. Needs to be very clean.

I had one many years ago but was not too impressed, constantly adj. I think I got mine at Johnstones Supply.

I have replaced several condensers like that. Most did not have dogs and were behind fences. In all cases there were irrigation heads in that area. Imo the irrigation caused it.

Had an old friend who had been saving for retirement. Had $30,000 saved. His wife had to go thru surgery and they took all of it before the government took over. They can barely put food on the table...

I used to use 15% but with the cost of it now, i use 5%. Haven't had any problems yet and flows fine on copper to copper.

I read where fluke was designed in USA but made in China.

I get cramps bad especially in the hot attic. Been taking a magnesium/zinc suppliment and after a month or so it seems to really help. A pharmicist recommended this.

If he is innocent then I want him to win, and if not then losing is what it needs to be. Evidence will hopefully tell.

I am not sure what they are even worth now but every install I do I call this guy I know and he shows up to remove the metal for me. I give him condensers, coils, furnaces, water heaters, and etc....

Have you guys seen video of This Man Owns Congress. From a Newtown resident. I haven't mastered entering video's yet.

You shouldn't need to add refrigerant unless of course there is a leak. If they are fairly new as you say, and just needs a leak repair, i would give the replacements a try if that is what the owner...

I would guess the ratio in auto accidents has gone up even more since 2011 partiall due to texting and driving. I see drivers everyday texting while driving.

Jad a friend(plumber) who will not wear gloves anymore cause he lost a finger when the auger snagged his glove.

With all your other skills you could even do apt maintenance work which requires a/c and elect also. Some of those jobs pay decent. Here they pay 40-60k a yr. I did that for awhile and had my own...

I would much rather have an older person than a younger one. From my expierence the older guys are very dependable,hard working, and less likely to leave. Three of the best workers I have ever worked...