Search:

An embedded workbench is a Jace option. With it you program and download a Spyder through the web browser.

Which makes me think.......you should be able to program the Spyder with a non webs...

That is what the alarm is telling you. Your job is to figure out why. Again.....you lacking alot of info for anyone here to narrow down what is causing it.

You monitor is seeing a call for compressor and a lack of amperage at some point. Again, alot of missing info.

You device doesn't sense voltage.

Not trying to be mean....but no one is doubting what you state is going on. But you haven't stated any facts about the system. Models numbers, serial numbers, actual voltage readings, actual...

Nope.........a spent 35 minutes on hold the other day. So I tried email-

Me- "I'm trying to find out what the input is for the humidity sensor on a VaporMist. Is it 4-20 mA or 0-10vdc?
...

You mentioned you checked pressures. How about temperatures? What's your discharge superheat or suction superheat?

Btw.....the remote interface is just that......you still need the zone sensor.

And one of these days......we will cross paths.:grin2:

Been good......been working down in AC mostly. Got a few big jobs going on. I totally forgot about Controls Fest. And I feel bad.....with all the business we do with Broudy....only 2 guys from LV...

You can download with any Webs branded Jace. But to program through the web UI, you need Jace with embedded workbench.

If you want schedules and setpoints, then you really only have two options. A remote interface or add a BacNet Module and use your preferred display screen. But cost wise, I would think the remote...

So apparently.... "Attempting to have intercourse with a hornet's nest is a very bad idea."

That's why this site is so great.....I'm always learning.

Looking at what you got there......I see the box deems itself satisfied, the effective stpt is correct, and the box is following it's effective flow stpt.

It's almost like the box thinks it's in...

What routers are you using?

Maybe I'm not understanding......but are you saying that the room temperature from the Zio is not changing, even through the actual space temperature is rising? What's she look like in debug mode? ...

I here you......but I only have issues with the ncisetpoints, I can do everything but upload/download, and the controllers work fine otherwise. The controllers were fine at the beginning of the...

What's weird is it's just the ncisetpoints. You try to change anyone of them and they go fault. And yes the way I get them back is delete and rediscover(That's a nice trick...with the...

Trying to find out if the humidity sensor for a DriSteem Vapormist is 4-20mA. We are having issues with the factory sensors and want to throw some Vaisala's in.

Couldn't find anything in the...

Existing Tracer front end going to a Trane BCU BMTW via IP. Building was vacated and network was ripped out. They need to connect back up to the BCU. Don't know the IP or subnet of the BCU. I...

You would need a licensed copy of Comfortview. Problem is what version of comfortview do they have......single or mutiple user? If it's single user and you end up acquiring Comfortview and dialing...

You're not discovering the MS/TP side of the routers? Are you discovering the routers? Are the routers on the same Lan Subnet? Why are you looking at Max Info Frames, to be a cause for lack of...

Well if anyone is interested......I was never able to find the file that was put my old database into the new installation. I ended up trying to install it in a new directory and it finally gave me...

I'm still having issues. What's wierd is that even through I'm unistalling the software.......it's never blowing the old database out. I think my database is corrupt. I unistalled network service...

The W7500C's were the first controllers I brought in. Did a discover>upload>learn nv>commision>download>bind.........with no problems. Now I can't upload or download.

Where's the pic with the covers open?:angel: