so by your suggestions she has one of these problems
dirty indoor coil (but newer unit)
Liquid side line set restriction. my suggestion. (dont forget suction restriction)
or undercharge
all...
Type: Posts; User: ersham
so by your suggestions she has one of these problems
dirty indoor coil (but newer unit)
Liquid side line set restriction. my suggestion. (dont forget suction restriction)
or undercharge
all...
on a unit that ices up....
could you name some variations besides humidity.
well if it is like every other dometic ice maker then why doesnt it work like
mosy domestic ice makers. make ice!!!!!
check that switch
I would make sure you dont change anything on the comtrol or CPC
you may need the TD for hot gas defrost.
also if you are looking at the condenser make sure you have a good charge
this will...
[QUOTE=TheFireman89;2019743] I did have a bad solenoid so I replaced that. Now it is shutting off at temp, which it didn't do before, but now once it shuts off it kicks back on.
Do you...
look for whatever tells it to stop making ice when bin is full
or when tray is full of water
most likely some kind of micro switch
if it is 76 in your home supply temp should be around 56 your system may be restricted
or low on charge.
didnt see the vs
oh well that is why i didnt opt for the vs
no heat-pump
I have A fan controller controlling a PSC blower motor.
Temperatures would change for heat on a heat pump
I dont know about 10 techs but
I will be at disney/Honda center (old pond) and the owners worked for York
Union shop best people i have ever worked for.
it can be done
my system slows down the fan as the temp rises when running the A/C
helps with humidity
when running heat fan speeds up as temp rises
set at around 500 RPM when i turn on the fan...
I would use what ever turns the pump on and off .. like pressure control. or fire control. i would keep the ct for failure alarm if running to long.
I have changed these out many times, but why are you changing valve plates on this compressor? you can usually valve off compressor recover whats inside and pull valve plates in couple hours.
and if...
18 psi is -17 degrees
do you think he had 20 degrees of superheat to the cmpressor?
since the txv was 502 it would not work on a 404 system.
subcool would tell you if condenser dirty,...
:eek:If we are talking about larger - semi-hermetic/scroll compressors, external overloads are not used and therefore not really that popular at all.:eek:
sorry maybe i dont know how to read...
[QUOTE=GenesisRefrig;1958398]Took someone's advice here and changed out the expansion valve and charged up the system with MP39. Pressures are wonderful and cooler is working good.
I suspect that...
[QUOTE=markettech;1958962]Gary,
Can I assume we are talking about smaller horsepower.....perhaps even fractional horsepower compressors?
If so, I think you nailed it pretty much dead on.
...
if the fish case is warm why not start on the fish case?
sniffing glue to much causes this problem
"when you have dried up pvc glue on your hands for 2 or 3 days and you dont mind..."
which esculates to this.
"You think about proper refrigerant...
sounds good for air conditioning but doesnt work for refrigeration...
if the customer called about it not cooling he would have called before it iced up.
every hotel room you use you check the filter and if dirty leave it outside the door
yeah what he said!!!!! good luck
Can someone explain why an under charged or plugged cap tube refer would ice up solid ????? i just have never seen that...more like a defrost problem or thermostat..
66 degrees of super heat 18psi...
iced up coil or no fans are running which would cause unit to frost up.
woulkd be a low or medium temp unit with txv.
txv would maintain superheat which would cause frosting but high super heat...
k-body comp needs fan running on it all the time espcially with 408 conversion
-10 for hard ice cream
0 for frozen food
check defrost legnth and is their a 1/4 inch bypass around epr?
you may need one if not installed
hoshis are the best.......
is this oem motor?
if not it may be undersized
water temp may still be an issue most new boilers are using a pid control
which recirculates the hot water back into the boiler to help prolong the boiler .
3 ton 95% Goodman with vs EAC UV light 14 SEER HEIL 410A 4 ton coil
System works great
My opinion all builders grade equipment is cheaply built rattles and most units are not installed...
First week working with union company through ua 250
I was offered a job from union company wed talked with renee at the union found paperwork i needed to join union.
Thursday mourning went to...
sent resume thanks
california if you use your own tools minimum 16hr
check mepatwork.com and hvacagent.com great place to see who is hiring but get info from rsd allied Trane also ask about turn over rates...
bad timing if you had applied for a job during summer everyone would have hired you... now that it is winter and Christmas is here and end o year inventory tax time and checking the numbers. from...
I know about those companies that is why I am with mostly hvac I still do refrigeration but only a little I would talk with the guys at rsd to see how their turn over rate is...
spell check did that
Why dont you try source, southwest, or airerite?
:D
Is their a company out their that aprciates an ambitious tech that wants to help the customer and make money for the company?
example: I take care of commercial buildings one of my customers...
[QUOTE=LisaMc;1671162]Hey Cats & Kittens,
I'm doing a little research for my hubby, and I'm hoping you guys can help me out.
My hubby is sorta....re-starting his life (long story) and is...
need to check if guardister is bad or thermister card?
mcquay ags160....
can i switch cards even though book shows different series?
chillpro is not being truthful.
no tools are provided to techs where he works only recovery and torches..
breakfast meetings 630 am Monday non payed not mandatory but if you are a new tech.. will...
thanks
not out of work
just seeking better options.
hey lash
i have another post about the union and would like to know if you can take the journeymen test without having a job with a union shop?...
just trying to learn more about the union in my area. seems you cant get the truth from either union or non
and I dont like people who have to lie about whos better..
never been in the union but it seems that rates for good companies and the union are almost the same.
rates have been going up fast and no new techs coming into the trade
all the young 5 yr and...
so the supv is lying... Is this what i can expect from the union my pay stub also shows company benefits which are not his concern...
They offered me the job and when i except I cant take the...
They said i cant take the test for 6 months!!
why 6 months is that a union rule?
I wanted to take the test now!!!
I was recruited by one of their salesmen on a job they needed help with ...
I'm doing an analysis and will post soon to prove in I'm doing an analysis and will post soon to prove in this day and age the union is a farce his day and age the union is a farce.Union=Welfare...
I live in the oc cali,
12 years expirience
started in residential
woked on market ref
hvac built up systems to water source buildings, and 90 ton + units
ice machine and chiller work
i have...