its not cooling at all. We have temp sensors throughout our home (home automation project never finished) upstairs is 89.3-90.6 and 1st floor is 82.4. The xl850 thermostat shows 80 degrees and all...
Type: Posts; User: justinm001
its not cooling at all. We have temp sensors throughout our home (home automation project never finished) upstairs is 89.3-90.6 and 1st floor is 82.4. The xl850 thermostat shows 80 degrees and all...
Over the winter we had all new A/C and heating installed, all trane, XC95M,XL20I and, XL850 thermostat. The techs have been out here 3 times to get the A/C working and it seems to quit working. The...
Also, I appreciate the help that forums like these provide. But it is upsetting that this forum puts limits and restrictions on help, for the sole purpose to push people to hire people in your...
Okay I got it about replacing a motor with less amps. I see I can replace a motor with the same amperage as old and all will be good. But considering they have more efficient motors now with less...
I don't believe in hiring people to do something I can do myself. Its wired properly and runs on both low and high speed Also seems to be pulling the correct voltage. It's an AC motor, 120V and...
So my HVAC fan motor has always been loud since we bought the condo. The motor finally died so I replaced it myself with an A.O. smith motor and it's been loud and is hard to start. I left the fan...
It's working!!! seems to be running fine but i'm not sure if it was damaged
I'm assuming let it cool for a bit then try to start?
I purchased a 1/3HP motor to replace my current motor that died. New one required a run Capacitor which I forgot to order but was able to run for 1 full day, now the motor is hot and not working. ...
My AC unit can barely keep up with the high temps and runs 24x7. Yesterday I replaced the blower motor as it died. Unit is probably 10 years old.
I replaced the 1/3HP 9.7Amp 4 stage motor with a...