Search:

Type: Posts; User: buford

Page 1 of 17 1 2 3 4

Search: Search took 0.03 seconds; generated 10 minute(s) ago.

  1. Replies
    8
    Views
    32

    Did the vac pump go real fast, just before the...

    Did the vac pump go real fast, just before the smoke came out.:grin2:
  2. Replies
    8
    Views
    32

    Then sounds like the high or wild leg. Maybe TB...

    Then sounds like the high or wild leg. Maybe TB will chime in.
  3. Replies
    7
    Views
    108

    Very Good.

    Very Good.
  4. Replies
    8
    Views
    32

    Single phase incoming power from pole?

    Single phase incoming power from pole?
  5. Replies
    8
    Views
    32

    Single pole contactor? going thru cap?

    Single pole contactor? going thru cap?
  6. Replies
    16
    Views
    435

    I agree with above, go thru and check the...

    I agree with above, go thru and check the settings devices and addresses, what i find on the Gen 2 versions, is anyone who sees under the covers, thinks they know it all and start pushing buttons and...
  7. Replies
    22
    Views
    293

    You might check the unions web site for that info...

    You might check the unions web site for that info also.
  8. so how do you recover refrigerants for repairs?

    so how do you recover refrigerants for repairs?
  9. Replies
    22
    Views
    293

    I t would never hurt to ask, maybe with the...

    I t would never hurt to ask, maybe with the smaller one man shops. At least it shows you are interested to them.
  10. Replies
    22
    Views
    293

    We all started at the bottom, like said, take in...

    We all started at the bottom, like said, take in all you can even though it may seem trivial, Read all you can, and know there is always other jobs. Just do not get your hopes up yet, that the next...
  11. Wow that would be good for our trade, as it...

    Wow that would be good for our trade, as it sounds like the customer can not get out of it.
  12. Replies
    10
    Views
    104

    I would still go down and check the returns with...

    I would still go down and check the returns with the fan on, maybe pull out the econo and look down? Maybe it was designed to have lots of outside air brought in. Is it going to get balanced?
  13. Replies
    10
    Views
    104

    Have you gone down and looked at the return air...

    Have you gone down and looked at the return air grill inside? They can get plugged up.
  14. So are you saying,you can not just buy recovery...

    So are you saying,you can not just buy recovery cylinders?
  15. So is it any equipment with 22 in it has to be...

    So is it any equipment with 22 in it has to be changed or only when there is a leak?
  16. Replies
    12
    Views
    195

    That's what i am thinking it is.

    That's what i am thinking it is.
  17. Replies
    18
    Views
    274

    As usual well said TB

    As usual well said TB
  18. Replies
    12
    Views
    195

    it is the square box just above the oil level...

    it is the square box just above the oil level glass.
  19. Replies
    12
    Views
    195

    Very good catch beshvac.

    Very good catch beshvac.
  20. Hopefully the new ones will work the same and...

    Hopefully the new ones will work the same and last as long.
  21. Is the room temp close to what your set point is?...

    Is the room temp close to what your set point is? If so, i would not worry about it.
  22. Thread: going to ice up

    by buford
    Replies
    11
    Views
    247

    Why were you called out? It probably has run like...

    Why were you called out? It probably has run like that all the time, since what they are doing is basically a refer unit.
  23. Replies
    12
    Views
    195

    Besides enough access ports, looks like a little...

    Besides enough access ports, looks like a little low on oil, and not bolted down, no pressure safety's?
  24. Why not have a tech come out and inspect all....

    Why not have a tech come out and inspect all. They can blow out the drain line and will know where to look for the main problem.
  25. Replies
    18
    Views
    274

    Your going to need to have a more seasoned tech...

    Your going to need to have a more seasoned tech come out to help. Measuring volts to ground? What were they line to line?
  26. Replies
    37
    Views
    594

    It would be nice if they had the oil level ports...

    It would be nice if they had the oil level ports on the side of the smaller scrolls, like they do the bigger ones.
  27. Replies
    24
    Views
    477

    Have you sent in the required payola?:whistle:

    Have you sent in the required payola?:whistle:
  28. Replies
    18
    Views
    434

    When i have seen that L2 is on a seperate...

    When i have seen that L2 is on a seperate terminal strip , maybe a quad connection on a cap, should just follow from the incoming line volt circuit, one side to the contactor the other line will go...
  29. Replies
    3
    Views
    162

    I thought someone made one that used pressure...

    I thought someone made one that used pressure readings for a level control.?
  30. Replies
    11
    Views
    291

    Was this on a low temp freezer?

    Was this on a low temp freezer?
  31. Replies
    15
    Views
    250

    If it did not make a difference they would not...

    If it did not make a difference they would not put it in the manual. Did it get inspected? Regardless, the equipment needs to be put in per the Mfg's specs.
  32. Replies
    17
    Views
    342

    No, in the wall for that room, where maybe it...

    No, in the wall for that room, where maybe it would not be so noticeable.
  33. Replies
    37
    Views
    594

    And try to put the suction filter in vertically...

    And try to put the suction filter in vertically so it does not trap oil.
  34. Sounds like it is working fine, cooler room air...

    Sounds like it is working fine, cooler room air and a warmer wall temp, or a lot of air coming out with the wiring on the back of stat will do this, until it runs a while. Is there a chance a supply...
  35. Replies
    17
    Views
    342

    Can you not just put grills in the wall back to...

    Can you not just put grills in the wall back to back?
  36. Replies
    6
    Views
    181

    Should be fine get it beer can cold and let her...

    Should be fine get it beer can cold and let her rip.
  37. Thread: Graduation GIft

    by buford
    Replies
    5
    Views
    177

    How about one of the multi type tools that hand...

    How about one of the multi type tools that hand on your belt, SOG, leather man are some brands.
  38. Replies
    6
    Views
    267

    Well technically no splices, has it been done,...

    Well technically no splices, has it been done, yes. I would do a bus scan and get all the zone addresses wrote down first and also write them on the inside of the stat cover. The little circuit...
  39. Replies
    13
    Views
    254

    It is not so much the brand, but who and and how...

    It is not so much the brand, but who and and how it gets installed.
  40. Old carrier high BTU up flow furnaces along with...

    Old carrier high BTU up flow furnaces along with bard units used those.
  41. Replies
    39
    Views
    862

    Well, putting about what is probably a 1/3 of the...

    Well, putting about what is probably a 1/3 of the charge back into the unit, without a idea of what is wrong or where it went will not get a lot of help. Especially from a guest on here.
  42. Replies
    15
    Views
    379

    As long as you are playing, put a small water...

    As long as you are playing, put a small water coil in it like carrier did and heat some hot water with it.
  43. Replies
    15
    Views
    379

    Drill with slight pressure and then silver solder...

    Drill with slight pressure and then silver solder 3/8 copper into each with a sight glass in it, and also a 1/4 inch access tee to adjust the oil level. But will it be beer can cold when done?...
  44. Replies
    8
    Views
    349

    If they are working as designed, leave them...

    If they are working as designed, leave them alone. It would be a lot of work to remove for no reason.
  45. Replies
    8
    Views
    192

    I googled it and the 2 things i read, did not...

    I googled it and the 2 things i read, did not give error codes and just plain made my head to hurt. You better call tech support on this, Or find out where R2D2 is plugged in at and delete him. good...
  46. Replies
    39
    Views
    862

    He wouldn't have dumper in the Freon without...

    He wouldn't have dumper in the Freon without checking the coil first would he.:whistle:
  47. Replies
    22
    Views
    518

    No not a jerk, but very naive, i have yet to see...

    No not a jerk, but very naive, i have yet to see any mfg pay to lift and set another unit on a roof. Now you might n have a leg to stand on, if after you UN crate it on the truck and check for damage...
  48. Thread: High pressure

    by buford
    Replies
    29
    Views
    945

    Yes to spraying down the coils to get it to run...

    Yes to spraying down the coils to get it to run and pull down the indoor temps, and if the coils can be split, even though the water runs clean, i would split them open to see for yourself. A lot of...
  49. Replies
    9
    Views
    213

    So there is 6 other units matched up the same...

    So there is 6 other units matched up the same way? It kinda sounds like maybe the VFDs were not factory installed?
  50. Thread: High pressure

    by buford
    Replies
    29
    Views
    945

    Is this a new unit or one that is going thru it's...

    Is this a new unit or one that is going thru it's first summer?
Results 1 to 50 of 830
Page 1 of 17 1 2 3 4

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event