Search:

The person that posted this quit working for these guys back when you could buy 502.

Well if anyone runs into one of these, with the same issue, just look down through the back where the leveling screws are and adjust accordingly.

First of all, I hope that is all of the model number.

Second, can anyone tell me how they hold up the griddle portion of the unit? I have a set of these that are made as one on a steel frame, and...

A little explanation is in order here. Have you ever heard the stories about the cultured people that own a lot of convenience stores here in the good old USA and they like to beat you down on the...

What does the inside of the evaporator coil look like? And is the drain trapped as per mfg specs if necessary? Just sayin'

"'Heating and Cooling" is the name of the company that hacked this one in. I am 100% serious. Not sure if that is schedule 40 or sdr21 for the electrical service.....

I saw that and made sure it was the intake pipe. I could have taken pictures of the whole install but had to get the unit running.

Trap used literally. If they were smart enough to use the pan overflow switch, you would think they would know how to plumb the drain.

Just wonering, are ClimateMaster units supposed to last forever? Our campus is filled with this kind of idiocy.

How would you like to get paid?

These are the ones I am interested in; can you figure media mail shipping to 66002



Thanks, mdharris68

Looking for a A/C & Refrigeration Log Template on pdf. Any help appreciated.

Thanks, Mark

Can anyone provide a Install operate manual PDF for the baysens019b? Can't seem to find it on the Trane Commercial site. Thanks

There is a product called henry's solarflex that you can use on metal roofs to seal the seams, and I'd bet it would seal the ducts as well.
...

do the tags give any indication what it is?

I would look at your expansion valves and any liquid/suction filter dryers for restriction to rule that out and then look at the liquid line size to assure there is sufficient size to handle the...

Well then I need to double check that, the suction line to the 14t was sweating but that doesn't mean it was running, I will go back and verify which unit was running with amp meter. I thought it was...

What about staging the smaller compressor of each circuit on first, basically changing the tonnage on the call for cool. This would put 9 tons to work first instead of 14 and may allow the compressor...

Thanks for the reply's. I guess I was hoping something could be done short of completely redoing all of the controls in this building.

Thanks Allen, it has the MCM and I set it at 40.

Another question, I have a 50T unit covering an auditorium that seats 500 people. All is functioning properly except it is oversized bigtime....

Thanks for the reply's

Thanks for the reply, I'll check that out. I also noticed in the config menu that it was set up as a 50 ton unit but I have a 30t air handler and a 40t condenser. Is this config option important at...

WFHB3004LF
J95L72675

RACC404BK03AD1
J95L82450

BAYSENS020B

So I am trying to figure out if when programming the zone sensor if I am changing the supply air setpoint so that the compressors...

OK, so a little background will help first. I am familiar with automated building controls to the point where if I can walk in to a terminal, sign in and view what's going on and make changes to...