Search:

Type: Posts; User: JES

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Hey Mr Bill, I just turned 63......is this what I...

    Hey Mr Bill, I just turned 63......is this what I have to look forward to?
  2. Replies
    19
    Views
    729

    Hmmmm...never seen drains with plugs on a...

    Hmmmm...never seen drains with plugs on a condenser.
  3. Replies
    1
    Views
    119

    My guess would be thermistor.

    My guess would be thermistor.
  4. Replies
    19
    Views
    522

    A good tech should be able to work on any name...

    A good tech should be able to work on any name brand. Yea, that is the normal set up. The system will switch over to gas at a certain temp outside or on run time.
  5. Replies
    19
    Views
    522

    The heat pump is set up to be the primary heat...

    The heat pump is set up to be the primary heat and the gas as back up heat. The furnace thinks the heat pump is running.
  6. Replies
    29
    Views
    2,559

    SWEET!!!

    SWEET!!!
  7. The units are 15 years old so you might not have...

    The units are 15 years old so you might not have to put up with the noise for long.
  8. Need to see some pic to know what your talking...

    Need to see some pic to know what your talking about.
  9. Replies
    6
    Views
    256

    I would go with filter in the return air grille....

    I would go with filter in the return air grille. Won't effect the efficiency.
  10. Replies
    9
    Views
    422

    That's just plain lazy. Loops are not good. Have...

    That's just plain lazy. Loops are not good. Have him install it the correct way.
  11. Thread: YJ Scale

    by JES
    Replies
    4
    Views
    329

    Thanks Guys! I really appreciate the help.

    Thanks Guys! I really appreciate the help.
  12. Thread: YJ Scale

    by JES
    Replies
    4
    Views
    329

    YJ Scale

    I have a Yellow Jacket scale, model number 68802. Can I buy just the hand held part? The battery wires came off the curcuit board. I can't tell where to solder them to.
  13. Replies
    7
    Views
    241

    It's a 4 ton unit. Was a load calculation done by...

    It's a 4 ton unit. Was a load calculation done by the 3 companies?
  14. Have them come back and check the subcooling. I...

    Have them come back and check the subcooling. I bet it's under charged.
  15. Thread: XL20i noise

    by JES
    Replies
    40
    Views
    2,188

    The fan looks like it's not spinning fast enough.

    The fan looks like it's not spinning fast enough.
  16. I would give it some time to dry. Maybe you'll...

    I would give it some time to dry. Maybe you'll get lucky.
  17. Best way to test it would be to turn it on in the...

    Best way to test it would be to turn it on in the morning. Don't wait till it's 81* inside.
  18. If your return is making noise, it's to small....

    If your return is making noise, it's to small. Have a pro take a look at it.
  19. Replies
    5
    Views
    458

    Did he make sure the air handler was level?

    Did he make sure the air handler was level?
  20. Thread: Heat Pump in CT

    by JES
    Replies
    5
    Views
    304

    32k btu in CT? What is the sq ft?

    32k btu in CT? What is the sq ft?
  21. Replies
    9
    Views
    444

    I would not open a system to replace the...

    I would not open a system to replace the insulation.
  22. Replies
    7
    Views
    270

    As long as the RA is the right size you should...

    As long as the RA is the right size you should not have a noise problem. Doesn't matter if you use 1 large or 2 smaller ones.
  23. Replies
    4
    Views
    408

    In heat mode you need to take temp inside close...

    In heat mode you need to take temp inside close to the coil for subcooling.
  24. Replies
    50
    Views
    4,072

    Hour and halft to find the tranformer........

    Hour and halft to find the tranformer........
  25. Have a pro come out and find the leak or you will...

    Have a pro come out and find the leak or you will be topping it off every summer. Sounds like it's going into defrost mode.
Results 1 to 25 of 73
Page 1 of 3 1 2 3
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event