I have the dip switches set so that it should be running at 1200cfm, which I've read is the maximum for the 10x20 and 600cfm for the 8x14.
Thanks for your help!
Type: Posts; User: Mike71
I have the dip switches set so that it should be running at 1200cfm, which I've read is the maximum for the 10x20 and 600cfm for the 8x14.
Thanks for your help!
After posting a prior question about return grille filters, I ended up opening a can of worms on how my duct is set up. Below is my info and then the questions.
Goodman 3 ton, SSZ16 with a...
Yes, I have reconsidered wanting to go that route do the replies I've received.
Can someone please explain why a variable speed would have more issues with undersized ducts?
Now that I've cut...
Well for the meantime, it doesn't appear that cutting the opening to the duct to about 7.5 x 19 will hurt anything, so that's where I'm going to start. They can always be put back to the original...
Well that's how the lovely builder set it up. Looking at it, the opening can be cut to as much as 7.5x19 on both. The original unit was also a 3 ton. The house is an 2 story, open foyer design...
Thank you for the replies. There is one upstairs and the one pictured. Both are the same size. The return inside dimensions are is 8x14. Static pressure was tested with the 1" filter when the...
I was wondering if I could get some opinions as what my best option is for filters with my system. I have attached a link of a pic of my returns, with an actual size of 15 3/4" x 19 3/4" x 4". The...
As some may have seen my prior posts, I just got a Goodman SSZ16 w/ an AEPF426016. I've read the Installation guide and have researched some things I'm trying to better understand, but I was hoping...
Thanks Gary,
I feel a little stupid that I missed that in your original post. :o It would have been hard for most, including myself to add a little sarcasm in any further reply in...
http://lh3.ggpht.com/_Z-8lXqN-xfw/ShQDM90nWsI/AAAAAAAAAnA/sR7Hl0N6gGc/s400/P1010013.JPG"]http://lh3.ggpht.com/_Z-8lXqN-xfw/ShQDM90nWsI/AAAAAAAAAnA/sR7Hl0N6gGc/s400/P1010013.JPG
Above is what the...
Below is hopefully a pic if done correctly. I would love to be able to slide it in the return, but the duct before the handler is only 20x10, which apparently is too small to add there. BTW - I but...
I just had an AEPF42601 handler installed. I had read/warned about the issue with the poorly designed filter rack and yes, it's a PITA removing the filter. The installer will be coming back on...
Thank you everyone for your replies. This is exactly the info I was looking for. I'll have him call back and see what the cost difference is between the two units, but I would assume it's mot much...
I was wondering if someone can offer their opinion on the following system:
Goodman SSZ160361 paired with AEPF313716. I currently have a 1995, Trane XE1000 unit and looking at taking advantage of...
I recently installed this thermostat, which has been working well with the exception of one issue. While in heating mode, the unit will cut on the auxiliary heating when the unit reaches its...