Search:

Type: Posts; User: shavedneon

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    85
    Views
    2,148

    I have installed around 10 of these, for about...

    I have installed around 10 of these, for about the last year, they've been around. Works very well, I used to add 3/4" unions in problematic drains, with this device there is no need. I got my last...
  2. Replies
    7
    Views
    385

    I live on a small cul-de-sac everyone has lived...

    I live on a small cul-de-sac everyone has lived here for years, when We got a new neighbor several years ago. A few of us on the street had 4 partys that first week, just so the new neighbors would...
  3. I worked on the extreme home in Tucson, the...

    I worked on the extreme home in Tucson, the building inspectors were onsite full time, the HVAC rough in was from 10:00-2:00am and he walked around the entire time. After the inspectors area of...
  4. Pressure sensitive adhesive tapes, applied with a...

    Pressure sensitive adhesive tapes, applied with a squeegee. At each joint, most jurisdictions have amended the new code to not use 1/4" long screws or rivets, to match the code as it has been...
  5. Hope this helps. 532061 532071 532081 I've...

    Hope this helps.
    532061
    532071
    532081
    I've never had an application that was longer than 35' with reduction from offsets and elbows, someone might know about a 100' long dryer vent.
  6. Sediment trap doesn't look correct from what's...

    Sediment trap doesn't look correct from what's visible in your picture, on the gas line into the furnace.
  7. Replies
    21
    Views
    1,811

    I use that exact tool, went looking online to buy...

    I use that exact tool, went looking online to buy the old switcharoo, couldn't find it, got the mullinex instead, works great on every furnace, one way or another. I've found failed door switches...
  8. Uses real picture for avatar

    Uses real picture for avatar
  9. Replies
    35
    Views
    3,121

    The paper clip that holds all the manuals (genius...

    The paper clip that holds all the manuals (genius by the way) is it screwed in place or use magnet?
  10. Replies
    18
    Views
    2,686

    Was that a new install, the PVC looks a little to...

    Was that a new install, the PVC looks a little to nice.
  11. Where are you at? Are you sure you know what...

    Where are you at? Are you sure you know what company it is?
  12. Replies
    6
    Views
    538

    2652 is the constant for 60 hz.

    2652 is the constant for 60 hz.
  13. Replies
    6
    Views
    538

    Is this what you're looking for?525581

    Is this what you're looking for?525581
  14. Replies
    144
    Views
    3,439

    many years ago, an electrician was explaining...

    many years ago, an electrician was explaining current and basic electricity to a rookie and I was eavesdropping while working on my part of that project. He explained it as warm water, you need hot...
  15. Is member 7682, he's been here a long time.

    Is member 7682, he's been here a long time.
  16. Replies
    15
    Views
    726

    The most fun, and comfortable position I've...

    The most fun, and comfortable position I've filled is testing and balancing. Think about it, testing is done with the machine running, always comfortable, and when you balance a system and fix...
  17. Replies
    13
    Views
    1,451

    Yup, and they made such a big deal about safety...

    Yup, and they made such a big deal about safety and efficiency and even installed a tankless water heater for aesthetics. Although they called it a "hot water heater" (one of my pet peeves)....
  18. Replies
    6
    Views
    437

    That was the idea the house was built around the...

    That was the idea the house was built around the coil. I tried some pan Crete not that brand but similar. And repaired coil, for now. If it leaks again, condensate or refrigerant, there's going to be...
  19. I do not have any experience with this company,...

    I do not have any experience with this company, good luck to you. Is there a live person to talk to? I've used wrightsoft for many years with great results, and any problems have been addressed...
  20. Replies
    1
    Views
    262

    What section in manual D

    I'm looking in manual D and can't find this fitting.523701
    This whole house is screwed up. I don't know where to start.
  21. Some guys don't like smooth things, to each their...

    Some guys don't like smooth things, to each their own, I'll keep them smoothed out, you can have them.... the other way.
  22. Replies
    6
    Views
    437

    Aspen claimed it as one of theirs with no...

    Aspen claimed it as one of theirs with no replacements available, thanks anyway. By the way, sales guy suggested I use a mobile home coil. Interesting idea, for a few different applications.
  23. Replies
    6
    Views
    437

    Who's Coil is this

    Does anyone know what brand, manufacture coil this is?
    523471
    Matched with a Rheem furnace, I'm thinking maybe a summit or allstyle, but I'm not sure.
  24. Replies
    7
    Views
    718

    Is it a REME?

    Is it a REME?
  25. Replies
    79
    Views
    3,786

    Very nice !

    Very nice !
  26. Replies
    10
    Views
    422

    We use flex connectors on every package unit...

    We use flex connectors on every package unit install, just as the instruction shows. I install the joint in the center on the bottom with mastic inside, to prevent leaks. Add a piece of ground copper...
  27. Replies
    23
    Views
    3,712

    Complete system outdoors

    Doing a tune and check next door, I saw this thing running, just hilarious.
    522611522621
    I can even see the tapered floor boxes (not insulated of course)
  28. Replies
    13
    Views
    1,451

    522041 522051522061 522071 Watching the show...

    522041
    522051522061
    522071
    Watching the show on the computer, obviously these guys don't know HVAC, or they would have said something about the efficiency lost by having the deck installed over...
  29. Replies
    79
    Views
    3,786

    I love it, I feel it's a great all around round....

    I love it, I feel it's a great all around round. Low recoil, place follow up shots thru same holes more often than most. Few reloads, if you can't get the job done with 20/30 rounds, give up. It's...
  30. Pays close attention when others might not....

    Pays close attention when others might not. [emoji106]
  31. has way too much R404a in the back of his van.

    has way too much R404a in the back of his van.
  32. Name is Earl and works on burners....

    Name is Earl and works on burners....
  33. Replies
    10
    Views
    420

    Yes, primary's are closest to the outsides of the...

    Yes, primary's are closest to the outsides of the cabinet, secondary insides. Yours is ok
  34. Replies
    10
    Views
    420

    I found a picture and appears your coil has...

    I found a picture and appears your coil has primary drain outlets that are outside of the secondaries, as long as an apprentice that can't keep from fiddling with things, didn't swap the caps around,...
  35. Must enjoy kittens

    Must enjoy kittens
  36. Lives in West Virginia

    Lives in West Virginia
  37. Replies
    4
    Views
    561

    Arzel zoning? anyone with expirience?

    I've been wanting zoning in my own home forever. I've installed a lot of Trane zoning, and several Honeywell systems. My problem is i have a flat roof house with no room for standard zoning....
  38. Replies
    10
    Views
    420

    Typically meaning, they have the same threads,...

    Typically meaning, they have the same threads, anyone could have moved the caps around. When you removed the caps, you can tell which is lower, or larger for primary.
  39. Replies
    79
    Views
    3,786

    I thought I'd love the G26/27 platform, but my...

    I thought I'd love the G26/27 platform, but my hands are too big, it's tolerable with the grip extension on the mag. Now it lives in the key locker just in case of an emergency.521411
    Do you have...
  40. Replies
    10
    Views
    420

    Typically, yes. The primary is either larger, or...

    Typically, yes. The primary is either larger, or lower than the secondary. Green for primary left, and right, red for secondary.
  41. Replies
    255
    Views
    4,157

    You could see

    You could see
  42. Replies
    17
    Views
    1,113

    I made a quick video this morning, showing the...

    I made a quick video this morning, showing the opposite of Fritz video. Usually if the yellow jacket won't work I can use the plunger from one of the others, but not today. ...
  43. Replies
    255
    Views
    4,157

    His pants were

    His pants were
  44. I've installed several exposed spiral duct...

    I've installed several exposed spiral duct systems in restaurants, bars, custom homes, and garages, including my own. Never have insulated them, and don't need to per code, if the ductwork is inside...
  45. Replies
    4
    Views
    372

    521021 So far, all I've found is calling it a...

    521021
    So far, all I've found is calling it a reducing stack elbow 90, makes sense. But then again so does drop, and tucked cheek elbow.
  46. Replies
    255
    Views
    4,157

    In the dark

    In the dark
  47. Replies
    255
    Views
    4,157

    While whistling Dixie

    While whistling Dixie
  48. Replies
    4
    Views
    372

    Yes, I also call radiused offsets ogee's, the...

    Yes, I also call radiused offsets ogee's, the only way to flow thru a severe offset.
    When I googled drop cheek elbow and tucked cheek elbow the only results are my question posted here. I hadn't...
  49. Replies
    255
    Views
    4,157

    While replacing his

    While replacing his
  50. Replies
    255
    Views
    4,157

    lost his mind

    lost his mind
Results 1 to 50 of 333
Page 1 of 7 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event