Search:

Adding the drier at the evap is a great spot for the mentioned reasons but the problem is later on when there is a problem with it, clog or otherwise and it was installed somewhere where no one knows...

I wouldnt leave a valve core in for something like that because anytime it would need to be taken off the system will be empty of gas anyways. If not and for some reason the system is slow to...

Hmm, I used to hate brazing and running copper when I was a nube but now it is my favorite part of the job. Clean and sanded joints for starters. I picked up one of the small rosebud tips for my...

York boards. The customer doesnt need the service calls from that crap. Especially with this system taking care of a server room. Take out the factory lockout board and create your own lockout...

I dont know if you are looking for t-shooting for just the compressors themselves but Copeland and Carrier both have lots of good literature out there. Also, check into some of yer local parts houses...

Thanks a lot for the ups guys. Yesterday was just one of those days and I appriciate having this place and a great bunch of fellas around that can understand. I too want to try and see if I can make...

Thank you for the nice replies. I guess I didnt know how it would be taken. I just know it sucks to not feel useful and that is the closest I can come to descibing things right now. Thank you for...

Hey folks,
I come to ya'll in a bit of trouble. I have posted here, not much, but for a little while. I have tried to help out where I could, whenever. I haven't posted lately because...

What would really be kool is to mount that sucka on some hydrolics. When its hot out you can raise that biatch up to catch some of that kewler air up top but when yer homies come over you can have it...

I dont think there is a bigger pride swallower than to have to ask the homeowner how to work the t-stat....:)

I had to do that along time ago when I first went solo and then wondered why the...

Thanks Viceman,
I did come across that as I was putting some stuff together on Lonspec. I wound up getting some errors as I was trying to get the 15C to look at some points on the 4th...

Have definately seen this before. The mystery water leak from a brand new A/h. Somebody overtightened the adapter into the primary drain pan and cracked it right at the outlet. Ok, that's just a...

Please delete this thread...thanks

Kinda hopin' when an administrator happens by this thread they would delete it. I have tried but couldn't. Thanks in advance.....

Alright, I think I have the vav deal dealt with. I hadnt really gotten into the vav stuff a whole lot but I think if I place a smart actuator on each damper that will give me a way of controlling...

I hadnt realized in all that crap I didnt mention that this was gonna have to be a HW LCBS job. That is dictated by my upper level. We currently deal only in HW LCBS and Novar PCESS. My boss wants to...

please delete the duplicate post. the title to this post is Wrong and I want the post named "Finally, the wait is over" to be left in place of this one....thanks

Well fellas,
I have finally got the oppurtunity to design, install and commission my first complete job. This is a big deal to me and is gonna be a killer learning experience. I am gonna walk...

Well fellas,
I have finally got the oppurtunity to design, install and commission my first complete job. This is a big deal to me and is gonna be a killer learning experience. I am gonna walk...

I have always done them with a 0-7 for one band and then 9 to 15 for the other that way there is a deadband in between where you wont have anything running. I have found this to be useful with a...

Hey fellas,
Well, went out this week and installed those autodialers and man, they are sweet. These things look a bit cheezy when I first pulled them out of the box but once I got to looking...

H10-PM IMHO. There will always be differing opinions on this one and has already been discussed at length many times here in this forum. Do a search for leak detectors and the like.

Howdy,

I am looking for some info on what program to use to check and modify the system setup on Varitrac II Central Control Panel.The date on the panel is 1993 so is EWARE where I want to...

I took a class at Stromquist a few years back. Got lots of good info on Pneumatics from them....I dunno where all they have branches and if they are just a local deal. I went to the branch in Orlando.

Thanks alot for the responses. Well, boss says customer isnt concerned with receiving emails so I am gonna investigate a bit further into these AD2000 dialers from homesecuritystore.com. My Novar rep...