Do you guys that smoke a lot of food prefer a Green Egg or a pellet grill?
Type: Posts; User: Gleng
Do you guys that smoke a lot of food prefer a Green Egg or a pellet grill?
How many of you guys are using Press tools for HVAC work.Thinking about getting one.I braze everything now.There are several brands.Ridgid ,Milwaukee,Pro Press.Which brand is best for HVAC work?I...
Just give them a little squeeze with vise grips.The fitting will tighten down.If using Silphos,you should be able to braze over the slighter larger space with no problem.If soft solder or 95/5 .I...
I have a Stratus,I like it.I also have the Inficon WhiperAire.Ultrsonic Leak detector.I also find leaks with it.I have thought about getting the Accutrak.Can you compare the WhiperAire to the...
hey!!!Saw you the other day at Arby's.Tried to go to the show I had my ticket and paid parking, in Advance.Parking lot was overfilled,Could not find a place to park in an hours time.came back...
I believe this unit has two TEVS and two solenoid valves.Rail switch energizes the top rail A thermostat inside the box energizes the box solenoid.There is a low pressure switch that will shut the...
You don't check subcooling on a cap tube system.You can check it, but it does not matter what it is.You charge a Cap tube system by superheat. First,is your airflow good,Is your evaporator clean.R22...
i have a fortune invested with my IManifold.But once i got a Fieldpiece SM380 and 480,I stopped using the I manifold.I find the fieldpiece App and MeasureQuick much easier to use.I also have the...
I cant private message you yet.Dont know if this will go thru .Email me at*************
Emails belong only in your profile, not your posts - thanks.
private message me your email ,i think i have it.I will have to double check
i have an Inficon WhiperAire (same Manufacturer as D-Tek and Stratus)I find a lot of leaks with it,But It won't pick up a leak as small as what most electronic leak detectors will.There is a learning...
I bought the Stratus.Very expensive ,But very good.Best leak detector i have used.The H10 is also good.The Straus is way easier to learn to use .much less adjustment.
i'm 63 years old.I'm quite a real tech.Been in this trade for 40 years.I can use the H10.Just saying I like the Stratus better.Its easier to use.Doesn't mean i can't use the H10.You don't have to be...
My Fluke 902 or any other meter for checking voltage, amps ,resistance.To check if the power is on!!!Also for trouble shooting electrical problems.
I have a new H10 and a Stratus.I like the Stratus better.The h10 seems much harder to get use to.Some guys love the H10.I find it hard to use.
wow.I had that reclaimer a long time ago,It broke.i think I threw it away.i will see if I have the manual some where.But not sure.
Most important tool to me is my Clamp meter.I like to know if the power is on or off !!!
I have a Fluke 902FC ,a fieldpiece 680 and a Redfish(For Measure quick) .However.I use the Fluke 902 most of the time.I'm just more used to it.Good ,solid everyday meter.I usually only use the other...
So.I guess he needs to look up my profile to get my email, But my email is not in my profile.Is there a way to add your email to your profile/If not whats the best way for him to get me his email, If...
Send me your email in private message.I have the Crystal tips wiring diagram you need.I can send it today or tomorrow.Soon as I get a chance.As far as the complete manual.I have that also.I would...
Give me a few days to check ,I probably have one.
I paid about $925.00 for it,when it first came out.The price has dropped a little bitI knew it ws coming Outland had saved up for it.Any price below $850.00 is about the best you are going to find.
I have a Stratus.It works good.I also have a DTEK-Select.It also works good.I like the Stratus better, because of the Cloud Hunting feature.I have never used the Fieldpiece leak detector,So I cant...
I first bought the Fieldpiece Vacuum Gauge.It is a good dependable gauge for about $135.00 I then bought the Blue Vac around $300.00.The blue Vac has more features.I would recommend the Fieldpiece...
i have been using MO99(R438A) for over 5 years.I have not had any problems with it.
I hang mine with a bungee cord in the back of the truck.I hook the cord to the shelves.
Of course it will frost up.If it doesn't frost, you won't be cold enough to make ice cream.The suction gas is below 32 degrees.It will frost .you can insulate it.But they don't usually insulate...
to N2fords.Do you have the Accutrac with the flexible wand.I was told that it was the one to get.I also have a Stratus <a DeTek Select and an H10.I have the WhisperAire that Inficon makes.It is an...
I live 20 minutes from there. Private message me,If the customer wants to talk to me about this freezer repair. I say Atlanta,but I actually live in Tucker,Ga.Just outside Atlanta
Sounds like the coil is not feeding enough freon to keep the complete coil cold.the fans come on, but won't stay on.Possible low on freon.plugged drier, plugged cap tube or TEV, could be a number...
Next time i will try 15% ,worked good with 45% .I also put heat trap paste on the valve(don't think that can hurt).
hey Olivero!!!.Danfoss makes some good stuff.But some stuff also sucks.Try their Low pressure controls.Set it on 5#.it will shut off at 20.Scales are way off.Not with a Penn.Set a penn at 103 it...
To Icemeister; thanks for the Danfoss video.It greatly helped.I installed the valve without any problem.I did use Flux with 45% silver.I know the video says the flux can cause corrosion.But it makes...
Flanders:Thats what I'm trying to avoid!! I don't like ANYTHING Danfoss makes!!!What kind of solder or braze were you using?I think I will use 45% silver.Use Heat trap and a wet rag,Heat the valve up...
I don't think this valve comes apart.Its OEM for a Ice O Matic ice machine .I know to use a wet rag and heat trap.can I solder it in with stay Brite/Or should I use 45% silver.What do you guys think...
So,I just got this Danfoss TEV,with no decent directions on Brazing in the valve in .Is someone familiar with the installation .Looks like stainless body,Do you use silver(15 percent) Silphos ,or...
Rip out those crappy accutools and put in a TEV.Done many like that.It is a lot of work,But end result is good.There is a company in St.Louis that will make the feeds and distributors for...
Im 60years old ,I used Analog gauges and a Fluke temp probe for 30 years.Now I have digital gauges,But I still use Analog gauges on occasion.I learned to carry a PT chart and calculate SH and SC the...
What kind of control do you have .Do you have an infinity control with it, or some other type of thermostat?
I agree on A/C .Coil should never freeze up.On refrigeration.Its different.You need a Timeclock and defrost.
Getting parts for them is a pain.All their parts are OEM.No one local carries their parts.I have to order everything .Takes 3-4days ,Unlessthe customerwantsto pay extra next day cost
I live in Atlanta.lots of True.Some Delfield,some BevergeAir. Way too much crappy TurBoAir (Garbage) Seeing more and more Chinese and Korean made crap all the time.I see some Advantco and...
For the cost of the BluVac ,they could provide a case.I'm sure it is good,But it looks as if one bump and its broken.Hopefully it works as well as advertised.I'm not impressed with the construction...
To Channelxbob: Just got the Bluevac pro in the mail today.I wish it came with some sort of case.Don't even see a case available for it.Anyway Going to put it to use tomorrow.
I have the Fieldpiece Micron gauge (SV85,I think) Its been ok.But I just ordered the BlueVac So I can use it wireless and with MQ,Should have it in a few days.Hopefully, I will like it.I looked the...
Do you find the Micron gauge on the SMAN 480 to be accurate .
CPR Valves are used on freezers to control amp draw.Especially after defrost.They limit the suction pressure to control the amp draw.They throttle down the refrigerant flow.Without one.Many...
Good Deal .Glad you called Master Cool.I have called them before.They were good people.Hopefully the repair is not too expensive.You already bought the tool once.d]seems like it should not of broke...
I would use nitrogen to push out the old oil.I don't think you need to flush ,unless it was a burnout.It won't hurt to have a small amount of Mineral oil left.I have done this same type of job.Never...
I would call master cool.I think you can order that part separately