I'm not 100% sure that this is relevant here, but if the points are coming from the maintenance or service tables, you can't see them in AX unless you have the enhanced CCN driver. And, supposedly...
Type: Posts; User: USC Anteater
I'm not 100% sure that this is relevant here, but if the points are coming from the maintenance or service tables, you can't see them in AX unless you have the enhanced CCN driver. And, supposedly...
One more interested - email in profile.
Thanks!
I don't know if this is related to this or not, but for what it's worth - I couldn't get my U10 to work in VMware once I upgraded laptops until I put a USB hub between the laptop and U10. It worked...
I think a lot of the issues you experienced are more related to Sedona than EasyIO... But you're right - until you get the hang of it, copying the kit and manifest files is a pain.
To skwsproul's point, MOV may be the way to go. There were several end users in the class I attended, and while they were ineligible for certification, they got the exact same training as the rest...
I know you said Wifi was almost a must, but if you can get around that, the KMC FlexStats will do exactly what you want. Pull a Cat5/6 drop to each stat, it talks BACnet/IP natively, and is fully...
You'll need some JavaScript for that piece...
It started out as just a naming standard, but the REST API was added more recently to address some limitations in oBIX, and some bugs in Tridium's oBIX implementation.
I'm not sure if this is the exact same issue or not, but I had a cooling setpoint failure message this week from a Reliatel with LCI-R. My setpoints are all written over the network, so there are no...
Can you discover the CCN device from NST? Baud rates the same? And when I said network and node, I meant bus and element, but you caught that... :)
I have used it without issue with both 3.6 and 3.7. Make sure you set the network number for the network you are joining, and set a unique node address. Outside of that, discovery should just work.
The AX Infinity driver uses a RS-232 connection to the NetController...
http://resources.lynxspring.com/index.php/jenesys-home/jenesys-drivers?task=document.viewdoc&id=86
If all you need are sunrise and sunset times, I believe you can use the SunPosition object under the Weather palette without a dependency on the weather service. You input the latitude and...
I'm not sure if you can do this with a 403 or not, but on the 600, you can enable an FTP server from the serial shell, and then get the license file via FTP. Gets you around any brand restriction to...
I'm not aware of any performance differences between desktop versions of VMware. As you mentioned - RAM is key...
Did you forward UDP port 1876? If I recall correctly, it needs UDP 1876 instead of TCP 1876. Also, this is assuming you are using Sedona connectivity instead of the TCOM driver...
http://www.ddc-online.org/
Vitinrj - can I get in on that action also?
http://controltrends.org
As a worst-case scenario, could you use a NetController II to convert from InfiNet to BACnet? I saw worst case because I'm guessing that thing is not cheap...
Those look like OEMed KMC controllers. Not sure if Honeywell has it locked down or not, but if it is an unmodified KMC controller, you'd use KMC BACStage.
You have to use the tags to do anything. As far as data goes, it will take however much or little that you have as far as different points go. All of the points you mentioned would definitely be...
This is definitely hotter than hot in the marketplace. We are using SkySpark from SkyFoundry to do similar stuff.
I ran into the same issue a couple of months ago. IIRC, the BCP service was referencing c:\LonWorks, but all of the files were in c:\Program Files\LonWorks. I changed the reference under the BCP...
Assuming that the EasyIO FG controllers you mentioned are what they are referring to as "The Beast", they are supposed to be about 30% more than the 30Ps. Last I heard was that they are supposed to...
I never had any luck with the CCN USB adapter, but I believe I got my regular RS-485 adapter to work with AX on my laptop.
I'm not 100% sure on this, but it may be a BACnet routing issue due to duplicate network numbers? It's been a while but I had the same error a while back with some other controllers if I'm...
I pulled this from EasyIO's FTP site yesterday:
https://dl.dropbox.com/u/42290724/EasyIO30P.vsd
There is a boolean switch in the Util folder under the kitControl palette that will do this.
There may be another way to do it, but when I am adding a Lon device, I add the device before I do a discovery. I can then edit the device's node ID to whatever I want (assuming it doesn't...
If the two devices are on the same subnet, and you can ping one but don't see anything w/ BACnet/IP, you may want to check the other device's (Lutron) subnet mask. The subnet mask is used to...
Hello,
I have a client who wants to migrate from his existing Andover 256 controls to AX, but can't do a wholesale swap of the existing controls. My initial thought was to build a frontend in an...
I have worked with Alpert at BAS Graphics on several occasions and was extremely pleased each time. Worth every penny compared to having an anal retentive non-artistic type like myself spend...
You can stop any of the default KMC programs, copy it to a new program location, edit it as you see fit, and use it that way. Or you can add your own program for just the piece you have that is...
KMC FlexStats have a FCU profile, and are programmable.
It is definitely dead on the Cisco side. Latest thing I heard was that they were working through some legal issues in order to release the code as open source.
I went to their class in Richmond a couple of weeks ago. No mention of using live data - just pulling histories as a recurring job. We implemented this in a couple of places and are pulling five...
They were planning on selling the line by the end of their first quarter (Oct), but supposedly the negotiations broke down at the 11th hour. They permanently shelved the product, and it is no longer...
I have used oBIX to pull some information out of a JACE with JavaScript for display on a digital sign. I have also used oBIX as the interface to a utility for demand response.