Type: Posts; User: yotaman16
I forgot it's r22
Hey guys I need to move a walkin cooler condensing unit. There are two 28000 btu evaps tied together with 7/8 then run to the condensing unit with 1 1/8. The liquid line is 1/2. The condensing unit...
That was my thought also. It's a strange icing problem. I'm heading to the site now to check the superheated now that the box is at temp and we shall know for sure
Gita call on Thursday cooler iced up. The customer shut the condensing unit down to deice evap coil. I arrived on site to find some ice in the center of the coil along with several paper towels...
Did ou make sure the drain is trapped
Can't find any parts is my issue no one knows what this is
Yep they were useless. They said hey don't keep info of units older then 5 years.. Great service on there part
Hey guys ran into a unit with a gas train in not familiar with. The first blocking valveis leaking at the solenoid. I either nerd to replace the valve or repair. I have no clue where to start and...
I dont see any sensing bulb.. To me looks like a fan control on a furnace
The set up thats there is so far gone it all needs to go and start from scratch
Which capacitor is that next to the flux capacitor, run capacitor or start capacitor? Im having trouble locating it !!!!!
The hood is way to small, the exhaust fan is undersized and there's no make up air
Hey guys never done a total install on a hood. Usually just service and replace equipment as needed. I have a account that needs everything new due to the addition of new equipment. The hood has just...
i went last nov. and it was great.. i did the csr class
im with ice on this.. also check the weep holes on the plate.. those hpr system are tricky if your not fimilar..
Yes if you call tech support they speak english there located in Mainitowoc...
Thats what i do i use the 3lb and hit a block of wood so i dont dent the pan then pull it out in pieces and melt the rest
Had a similar case do this to a tech at my old company.. Did exactly what you did and nothing..If i were you before you do anything i would do a performance curve. but i would ave the tx and nozzle...
We had had a bunch of problems with Sporland solenoid valves not closing.. My company wont install them any more after like the 3rd one in a year. One of those was A flare valve too
h10 is the best but...... The newer ones seem to be pickey.. I wish i had one that was 10 years old
from the looks that trane has long done its duty and that things gotta make noise in the building
I like the ETCs as was stated.. I refuse to use any of the multi stats.. We have had way to many problems with them, jc mr4, the sporland, dixle they dont seem to last..
hey guys im in the market for a new oxy-acy torch kit.. i currently run the smith quick braze kit but they dont make the good tip any more and was looking for a new setup.. I do all commercial...
IRON OUT .. dont say i said so tho.. will make the machine look new in no time.. Im not sure as i would use try it on the nickel evap plate.. When i was out at the mani factory this year they...
Hey guys my company wanted me to take a gas class so i can run some calls out of state.. Should i be getting paid for this class thats 50 hrs long?