Type: Posts; User: bdivell
Looks like TeamViewer is the way to go moving forward.
You would need several RIB cards but could work depending on your needs as the price point is low enough....I have used them to control unit heaters in the past.
I wear mechanics gloves sometimes, long johns, wool socks, fleece jacket, parka, touque are a must
Yes they can.
Agreed! LOL :)
Take care of the basics first , screwdrivers , nutdrivers , wrenches etc....basically all your basic hand tools as you will be starting as a helper most likely. add on as you need it for the job.
No, this one
I use the Ideal Reflex T stripper , T&B crimper , I have found that I don't care for multi use pliers/strippers. I wouldn't worry about buying everything at once. Just take your time and buy quality...
What are you trying to accomplish with the rain sensor? we have used sensors to detect snow for Liebert units in data centres, we energized the condenser fans every so often to avoid ice and snow...
hmm.... I remember that one :)
I can help you out....shoot me an email
Kontrol is 100% correct !
READ more before you post.
Email me....Email is in my profile
What issues are you having ? I have been running 2.2 for some time now with no issues.
He never asked for input on that , I don't get why he would want to reset it either.....
AHU1 Static Reset Sp = Scale( OAT , 0 , 0 , 0.8 , 95 , 1.4 )
AHU1 Reset = AHU1 Static Reset Sp
Yes you can use an SSL as a set-up tool with the proper key stroke , then change the protocol , baud.
Looks to be a nice graphics suite for floor plans...First time looking/hearing about it.
Do you have Field Loader installed? it is a separate install....
Shoot me an email....
I would contact your local Delta rep, config can be tricky since you will need to address your OWS, transfer graphics etc...
Those are things you will need to look into....I have 4 online daisy chained for the last year, nothing hardwired all read/write via BACnet....I ran 22ga 3 wire for my MS/TP the literature stated...
are you using end of line resistor ? also how is the network run... as in is the MS/TP network only Lennox M2's ?