Search:

replace valves,leak lock will hold until next guy comes along and removes caps and doesnt reapply leak lock.

ive never seen a condenser freeze while in cooling mode,your evap. coil is what freezes and your suction line will freeze back to the condenser.several things can cuase this.

you're unit is working like its supposed to put those gauges on ebay!

definitely talk to owner,wouldnt settle for repair they would have to buy me a new one.

no problems with mastercool.

their definitely blowing smoke about the "lifetime" warranty,thanks for the heads up.hope you get your problem figured out.

definitely need more than 400 sq. inches of return for 3 ton system.

the tighter the system the better.not something thats hard to do

try replacing the fan?

thats odd about the warranty,amana salesman at our shop just last week he said they were giving lifetime warranty and would replace entire unit and pay labor to changeout.

get you a P.T. chart and learn how temperature effects pressures thats a good start.each refrigerant will have a different pressure temp relationship

Tempature Drop Across Coil

the oxygen in the line causes the oxidation the nitrogen is a dead gas and displaces the oxygen no air no oxidation means less problems down the road

This Guy Is Exactly Why We Have Diy Rules On This Site,get The Message?

Amen Brother!!!!

didnt say anything about 4" said to multiply circumference of pipe times 4 then add 2" for lap and yes this will work for any size pipe.we wrap 14" pipe everyday and it works perfect,no rule of thumb...

we run alot of metal pipe we multiply size of pipe times 4 then add 2" for lap 3.14 sounds tight if you smash insulation youre defeating the purpose.

some cheese with that whine,maybe a box of kleenex and a diaper

www.wrightsoft.com

daiken systems are designed to run up to three heads on one condensor.they they are low cfm systems designed to run all the time and maintain one temp regardless of outdoor temp.what you're wanting...

liquid line is highside during heating and cooling, flow of refrigerant just changes directions.suction line becomes discharge line in heating mode.during cooling inside coil is evaporator outside...

looking for literature for gas heat any suggestions,also dual fuel systems,thanks

A psc motor already has a start capacitor in series with the start windings.by adding a potential relay you're not going to help yourself.if you suspect your compressor needs help starting yes a hsc...

show me somewhere that 80% of homes being built aren't being built by some big developer, they build them as cheap as they can.for the other 20% they may get their hood ducted to the outside.guess it...

you're right wasn't thinking about the high velocity,thanks