Search:

Understanding that I am not a professional, I did want to let you guys know of my similar experience with my cooling system. If you check my other threads, my compressor began making a similar...

Hot start was added when they installed the TXV. There was a hot start previously installed by the contractor that installed the unit, but the capacitor had burned out (only rated for up to 3 ton...

No, there is no finger-pointing or blame. I do trust them; what started the whole discussion was when he told me R22 lubricated the compressor I felt I needed to check with others before signing off...

I don't know how much they put in, but I'm running 75 psi suction, and about 178 discharge. Is that too high?

Well, the tech came out and said the noise is an indication of an internal problem. It's also pulling about 6 amps more than what is stamped on the housing. He's going to look into an oil charge...

Guys,

Over the last few months, my compressor has gradually gotten louder, and now I'm noticing a metallic grinding noise for the first few minutes when it first kicks on. Prior to the service,...

Guys,

Over the last few months, my compressor has gradually gotten louder, and now I'm noticing a metallic grinding noise for the first few minutes when it first kicks on. Prior to the service,...

I'm not an A/C pro, but induction motors are pretty rugged and will last a long time if properly sized for the application. Either you aren't getting sufficient air flow, or the load needed to...

Goodman 4-ton condensing unit, Goodman 5-ton evaporator.

My 5 year old evaporator was replaced earlier this week (don't use clorox), and they had to evacuate the entire system because the service...