Search:

Yes those clamps are the Achilles heal. Im dealing with a wire break in my 2nd set. Didnt bother to call as i figured your hands are full.
I was able to just pull the wire through the hole at the...

I'd love one. But ya 2000 would be outta my range

Sent from my SM-G930W8 using Tapatalk

True enough. And i suppose they are comparable to my digicool set.. just when you see them in comparison to the testo set they seem pricey (they showed these and then the testo underneath, can buy...

Holy sh $# those are pricy

Sent from my SM-G930W8 using Tapatalk

The bryant and carrier tstats are not interchangeable. ..ive tried.

Sent from my SGH-I317M using Tapatalk

Look for popped eyelets in the he near the limit.

Sent from my SGH-I317M using Tapatalk

Ok didnt read the whole thread but the lower the ohms the higher the watts.. also the less nicotine you need! Hotter vape, more clouds.. some say more flavour.

If your mixing.... start here and...

I had one do the same thing! Emptied the whole 4lb charge onto the homeowners lawn, with oil. Was a bad day.

Sent from my HTC One M9 using Tapatalk

I copied this down from somewhere a while ago.. not sure if it will help but here ya go.
Its how to get the total heat from the condenser.

716551

Sent from my SGH-I317M using Tapatalk

Where is Ottawa, Ontario, Canada? Hook a bro up!

Sent from my SGH-I317M using Tapatalk

And love beaver!

Sent from my HTC One M9 using Tapatalk

I too will stop buying UEI if that is the case. Doug and Brenda deserve better than that!


Sent from my SGH-I317M using Tapatalk

Nice, should have a drain line from the intake pipe if it is piped in to the top of the cabinet. The mods tend to drip onto the gas valve in low fire.

Sent from my HTC One M9 using Tapatalk

I found one that happened to. It was a Rheem that was not properly converted to propane

Sent from my SGH-I317M using Tapatalk

Looks good. Is the drip leg 3" min? That's all I got.

Sent from my HTC One M9 using Tapatalk

We are selling flowmax tankless units. Made in Ontario!

Sent from my HTC One M9 using Tapatalk

I would guess the other bring the filter type used? Question: can someone give me a good definition of System Effect? I've heard this term before but have not learned a definition for it and im too...

Crap?

Sent from my HTC One M9 using Tapatalk

I've high temp'd them once before. It stunk!! But it worked!

Sent from my HTC One M9 using Tapatalk

I had a Lennox like that the other day. I changed and repositioned the hsi and it seemed to be fine. Then the next day another tech had to go out and he changed the gas valve... I'll have to see...

I think it's in reverse too. I believe I've seen this on Facebook playing forward.

Sent from my HTC One M9 using Tapatalk

Anti rust additive and A/C Renew?

Sent from my HTC One M9 using Tapatalk

Had one tonight.. 3°f evap sat temp with 64°sh... 14ajm36 i believe... Frost started half way through the txv and ended about 3 passes up the coil. Installed in 2014

Sent from my HTC One using...

Wow lucky there!

Sent from my HTC One using Tapatalk

I tell customers to set back no more than 2-3 is they must.. Better it runs in low heat for a longer cycle than jumping to high heat to bring the house to temp.. The infinity will adjust it's run...

Yea. Well the one I work for.. Sorry, Never saw this.

I bought a 40 dollar shop vac brand from Lowes, little tiny thing; maybe 5 gallon, and it has lasted me 5 years with one switch replacement. filters are easy to get. and comes with a hanging bracket...

I think the rental cost would depend on what you install.. I just send in a sales guy.

I know you can get a 2 stg, dc blwr rheem with 14 seer (I think) ac , media filter and hum for around 130/mo.. all inclusive

We dont do new home construction anymore.. so it eould be a retrofit eith existing ductwork

They rent everything.... water tanks, hrvs, ac, furnace

7 yr term. Install, maint, repairs, filter and hum pad included. Pay monthly.

I know very little about this, I have read (probably on here) that with ecm motors it is best to have a true rms meter to diagnose. I don't have one yet either.. I am interested in reading the...

Thats awesome. Neat old stuff!!

That'll be a *****

LOVE IT!!! that was awesome. you should write a book![emoji1]

I've seen higher end cars with the defrost strips layed on the window under the wiper blades.. That seems like a good idea to me.. Same function as the rear defrost.

Shut down another 1 today also... look for a really sweet sort of smell from the burner when it shuts off... Or the exhaust pipe or drain tubing.

Yea in the back if you lay inside on your back and look up.. The front isn't as easy but I find they rust out in the back myself.

Heres another rotten 2ndry

They also rot out at the back hot Header where the primary heat exchanger meets secondary heat exchanger .I have seen those areas completely plugged when we removed them... although then You're...

Me too, till the swivel head snapped the tiny wires inside and the light quit

Short flue length, distance of probe to exhaust. Lower O2 causing hotter flame, blower speed setting. What was the delta t? My guesses.

And the burner face if rusty.

We had a military guard shot at the unknown soldier memorial as well as somebody entering the parliament building with a gun..3 total injured. I believe the guard is dead. .. isis sux... oops wrong...

I don't care! Mine was committed today!

Very nice. Is the Lennox sitting on a return box? Is the side cut out or just the bottom?

Sweet! I would love that! And showcase the furnace behind glass French doors. With good lighting. Damn right!

This is what I do. I hook the gauges to the low side vcrt access port and the micron gauge (I have a yellow jacket and added a ball valve) the to the liquid side vcrt.... Pull the Schraders on the...

Nice!