Search:

Type: Posts; User: zarathos

Search: Search took 0.00 seconds.

  1. Replies
    26
    Views
    2,771

    As many before have stated, two things belong in...

    As many before have stated, two things belong in a condenser: refrigerant and oil. A good tech will locate the leak and tell you your options to fix it.
  2. Just fixed the same problem on the exact same...

    Just fixed the same problem on the exact same furnace. Ignitor position was the whole problem, on an OEM replacement. Repositioned the ignitor and ignition was smooth as ever. After I checked the...
  3. Replies
    12
    Views
    1,776

    http://usatoolsinc.com/4wayrefrigerantgaugeset-r12...

    http://usatoolsinc.com/4wayrefrigerantgaugeset-r12glycerinegaugestif9600.aspx

    TIF 9600 Glycerine Gauges.
  4. Replies
    14
    Views
    1,580

    From what I've learned on time delays on cooling,...

    From what I've learned on time delays on cooling, they are on to remove moisture off of the coil, to help reduce the possibility of mold. That is what I was told from Carrier when I asked about...
  5. I am in agreement with socotech, I would be...

    I am in agreement with socotech, I would be looking at the reason why there is low voltage to the contacter. You need to tell the technician about the condensing unit running after the indoor unit...
  6. Replies
    9
    Views
    2,634

    Possible stat wire touching the test terminal on...

    Possible stat wire touching the test terminal on the board. Causes the same scenario.
  7. Replies
    13
    Views
    2,612

    I've gotten a couple from United Refrigeration,...

    I've gotten a couple from United Refrigeration, but I don't know where you're located and if they are close to you.
  8. Thread: blower wheels

    by zarathos
    Replies
    30
    Views
    2,353

    I usually go to St. Louis Boiler Supply, they...

    I usually go to St. Louis Boiler Supply, they have the brushes for cleaning boiler sight glasses, and sometimes if I'm feeling thrifty, I've gone to Harbor Freight and bought a multi-pack of brushes....
  9. Thread: blower wheels

    by zarathos
    Replies
    30
    Views
    2,353

    I use the same approach as sparky05, I use a...

    I use the same approach as sparky05, I use a black nylon tube or bottle brush, mark the squirrel cage tine with a Sharpie, and start cleaning until I come back around to the mark, being careful not...
  10. Replies
    33
    Views
    5,614

    When I was in a small restaurant in Wuhan, China...

    When I was in a small restaurant in Wuhan, China (adoption) , there were two guys installing brackets, one hanging out of the window, and one holding on to him so he wouldn't fall. After that, the...
Results 1 to 10 of 15
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event