They say it takes 10 years to be a
Professional in a field. Growing is learning keep seeking and get as much OJT that you can get. You just get into and become a sponge bob. Time will make you or...
Type: Posts; User: toyo066
They say it takes 10 years to be a
Professional in a field. Growing is learning keep seeking and get as much OJT that you can get. You just get into and become a sponge bob. Time will make you or...
I just took my Test about 5 months ago and i was asking for a qualifier for me. I filled out all the information and that never came up. I had the experience and i just put that down basically my...
No i know it’s late. I got my lic now so i am good. Thanks.
Sent from my iPhone using Tapatalk
You can go to your local place like AAA construction class. They supply all the books and then you can go register at a local examiner they do it on line now so you don’t have to go to Tallahassee or...
I am looking for a HVAC Qualifier in Jacksonville for about 4-6 months. Anyone in Jacksonville can assist I would greatly appreciate. Class B I am just lacking the Financial part and want to get it...
understand that.... You don't use it you loose it....
1 1/2 acres is 65340/312.50 is the equation. but what does this have to do with hvac work. I don't understand it. Drives me nuts. 5018.00 is what the answer is
it is the state exam. Passed mechanical part now I am doing the financial tmw. 202.688 is not in the answer, its not even in the four that are offered on the multiple question.
this is a crazy question on the Financial part of the test and I am not sure if there is a formula for it and really why is it even in the test for HVAC.
2 workers can seed 625 Ft every 2 hours...
the original install was good that I can tell. The unit as in all cases with case coils are like a seperate unit as you know so the case coil and blower were install correctly. I replaced coil due...
First of all I have never seen a set up like this. CASE COIL on a Heat pump here in Fla??? I changed out the coil in the air handler due to a leak and the unit is 3 yrs old. I did everything that...
I could not watch the whole thing so he did vac it down.... I was like hell no I am not wasting my time watching another seg of this guy trying to act like he knows what the hell he is doing.... If...
yes there is a flare and there is a perfectly good piston in it please read the first one where it states that I did take the piston out and flushed the entire system out with nitrogen. I checked...
Yeah so am I but its a rental prop and this guy is a real jerk. I mean it is not even that cold out like today it is 68 and he wants his landlord to pay for a stay in the hotel for over night. It...
sounds like the reversing valve is working I did wack it a few times but it does sound like it is working... Cap tubes I am leaning on that too but right now after going over and over it sounds like...
I have to check it out tmw. The liquid pressure in this case is 164 going into the system the gas coming out of the ahu drops to 21 at the condenser service valve... So that is why I am saying that...
Eco Temp is ICP Carrier product.... CHEAP one.... IT has a TXV Lennox ahu and I changed it out when the condenser was installed. Mechanical device so no braising was needed. Could be bad check...
with the information provided cant really help ya. Could be installer did not install correctly... Did you check filter or coil (AHU) to see if they were dirty.... Possible txv issue but I doubt it...
yes and this is what I am getting...... I have done everything correct... Been in this field for 12 years so all the things that were suppose to be done was done correctly. That is why I also put...
omg that is sooooo funny what the hell and he had the balls to put this on line. PLEASE I hope that guy is not in jacksonville fla because I think I have seen some of his work before....... toooo...
Working on an r22 pos eco temp in cooling mode high side 198 low side 62 its about 75 inside. Switch it to heat mode and the common port drops to 6 psi cap tubes freeze up. 3/4 side goes to 165 and...
aint that the truth.. alot of techs will say that they know how to do sub cool and superheat and come to findout that they dont.
Dremel
Multi-Max 2.3-Amp Oscillating Tool Kit the Rotary one sucks. It throws crap into your face this one cuts like butter and you dont have to worry about the spinning of the blade it just...
101
when using 410a it is the only way to go. if you are short on just one pound of Puron you could lose up to 4 degrees cooling. The only way to get it right is your SC and SH if your having an issue...
Not in this Country. You sadly are mistaking sir.
Ever run into those Lennox coil leaks on the condenser unit??? The dremmel is the best tool to use to take care of this issue. Cut out some fins and then cut to copper line, insert a piece of 3/8...
Has anyone ever used the x13 surge protectors and if so doesthe surge protector stop these damn things from burning up.... POS I have had about 6 of these things go on me within 3 weeks and there...
Never had an issue I would write Field Piece and tell them and send the SR# they should know when you purchased it. The only issue I had with it was the hanging hook it broke but other then that I...
Yeah i am waiting for the 4 to come out soon but I aint jumping to buy it I will wait 6 months. Price will be high.
SMAN 3 IS BETTER HANDS DOWN. I HAVE BOTH OF THEM AND THE WAY THEY BOTH DO THE SUBCOOLING AND SUPERHEAT i HAVE TO GIVE IT TO SMAN 3. PLUS THE TEMP CLIPS ON THE SMAN3 LAST A WHOLE LOT LONGER. THEY...
I am aware of the EPA statement and what will be done as far as elimination is concerned, what I was getting at is that some SUPER TECH told me that you no longer as of 2014 can do any repairs on the...
I have been looking to see if this is real or just same old gossip... Come 2014 the EPA is banning R-22. What I have heard is that if a customer has a leak in the system that we are not going to be...
I love it and have been using it for about 6 months, good price check out youtube and put in testo 550 and see what some tech's have learned about it... Pretty helpful things.
50 microns or 500 microns.... big diff there.. 500 is what it should have been for 45 min he must have a sorry vac, but he could have meant 500... You should be okay if it's 500 microns oxygen does...
I knew a person who got involved in the HVAC industry and he was a complete idiot... If he could do it, I could do it... The question is HOW GOOD!
chaching chaching for the correct work thank you.
make sure they flush it with RX 11 and blow it out with nitrogen. It is the only way. If you dont do this then you will be paying for txv valves and possible compressor down the road. Best bet is...
I work for a company here in fla and we use to do piece work. They have changed over to hourly pay but they dont want to pay for travel time between jobs. Nor do they want to pay you hourly rate...
I have heard all three and the Lennox has it but not by much I doubt you would even know the diff if you was in your home trying to listen for it... THat is unless you have paper walls......
Moe, Larry And Curly! Three Stooges A/c Repair Company!
They have several exhaust fans and two of the them blew a belt. They failed to tell me that.... I guess I need to speak Japanese I think so.... NOT!
It is a Japanese Steak house and they cook right under the damn return... I have told them that they need to move the return, now they understand why.... Other then the cooling issue that you have...
The problem was the smoke detector, I pressed the re-set button and it came on... Thanks for the help... Check is in the mail...
The extra stat wires probably go to the fire/smoke detector. Look
changed out board, yes, I do lack it here, never worked on a unit like this.... the stat is the same stat that was on the unit...
I am working on a Trane Voyager (Spelling??) The customer thought that it was the t-stat so he changed it out this t-stat does not work with 24v it is ohms and that seems not to be the problem......
I have heard a few different things from other tech's but they dont have the experience with the 410... However, if you do it by the scale that is cool when it is empty, but what took place was we...
try running a hose over the compressor for about 15 to 20 min... It could take a few hours.
185.32
I have a question on this... I am trying to figure out the temps and all that with R410.... We had a mini split to install today which was a R410 system... On these units you have NO liquid side to...