Search:

With all that has been said . It still is better than working on restaurant eqipment.

hearthman do you have any brands or websites you suggest

I am building a house and want to put a good wood burning fireplace in it. dont know much about them so does anyone have favorites that they think are good options

I have a set of the hilmors. Less than a month old and the micron gauge has quit working, it won't calculate subcooling on 22 and the hook is falling off. I did talk to the rep for hilmor and the are...

I have seen this happen before, but it just split the carlyle down the middle around the oil pump. the valves were closed on it so I guess the only thing to do is leave the discharge valve cracked

you can try to use some hardcast butyl tape. it has worked for me in the past. depending on how bad the box is

Well i would go with CPC but you already knew that:grin2:

I can't believe POPE brought up Steve Esslinger. I guess he has worked everywhere.

see if you can find out more about this system I would like to know.

he's right I have heard of the subcooler leaking into another rack. Also put a balloon on the pop-off.

Ive had the same problems at wal-mart. people before me looking for a leak with a H-10. Get yourself a TIF ZX and go try again . If you don't find anything start punching holes in the armaflex in the...

i have had some problems with Brainerd remanufactured comps. they seem to have a lot of vibration

i have a G5 just make sure you use a big extention cord. or it will burn up the motor.. i lost two that way

try lightbeam they are in it also

when you pump oil into that fitting above the pump it actual fills up the back of the comp around the motor windings. there is a sep hole into the crank case but it takes a while, which it looks...

ya'll just remember its all about the money, more hours more money

what are you talking about comstock the guy is working on a rack not a AC

should still have model number on a brainerd tag. should be something like 06CY337

what is core product temp?

we are getting rid of ours, nobody was supposed to go down there anyway. But it was a good place to cool off.:D

R-507 will run lower head

thats is some nasty stuff when you get it on you. the only thing I use it for is to coat gaskets

sorry I didn't realize you where as old as this unit. You must be the only living person thats seen one new:anyone:

hey if you think you can do better come on then redneck

ther are no traps the compressors sit under the evap