Type: Posts; User: louiee
twophase, I have some thoughts on this. Tried to PM you but could not. PM me with contact info.
1.5 depending on the coil design is between .051 and .053
1 depending on the coil design is between .040 and .042
Three error's caused this crash. nose up in stall warning.(Wrong and basic for every plane) Fight the auto correction (Basic for every airplane) Remove flaps (Wrong for every airplane. This has...
Make sure the piston is installed facing the correct direction.
Your orifice should be about a 79 for R22 or a 78 for 410A.
What percentage of new installs is the noise of the condenser a consideration to the home owner? Is the homeowner willing to pay more for a quieter condenser or will they just choose another brand?
If replacing them is an option do it.
We should soon see a major change in the way data centers are cooled. The current method of cooling the data center air to remove heat from the processors is not effecent. Removing the heat from the...
B133546-P12 is the Trane factory part number. This valve should work fine for you.
attach a pic of the valve and I can tell you either it is a back seating valve where about 10% have a valve core or just a front seat and would have a valve core.
So, do you think it will affect consumer behavior? Is the $1500 enough to influence the buyer?
True on that.
Currently there is a push in Europe for Co2 systems. What are the thoughts of using Co2 in North America?
There is a forum to follow the developments R744.com. if anyone wants to read up on it
That is our government at work. Why do you think the tax code is as long as it is.
They don't make things clear.
Ya, I hope so as well, for all of you and I. I wish I didn't have to forecast but that is life. With the change to 410A combined with this, makes for some uncertanity.
What is the part number of the valve? What manufacture made the valve? There should be a bar code on the side of the valve with the manufacture part number and the trane model number
I don't sell systems, I make the control products for the OEM's. I am trying to develope a forecast for the mix of products built. Will consumers be more willing to move up in SEER for...
When i started in this industry most OEMs tested for leaks using air under water and looking for a buble. This can be very unreliable as it is dependent on a person to watch for that bubble. Now...
sounds like a lot of custom work. You should post some pics. I would expect bettere control of SH with the 4 TXVs vs. 2.
@ the Tran web page you can watch a vid of the spine coil getting produced. An aluminum tube coil is also less likey to leak from formicary corision caused by POEs in the 410A
What are you using for distributors with the 4 10T TXVs. Are they hot gas bypass or just straight nozzle or venturi?
The most efficient designed coil for a condenser in straight A/C is a micro channel. However, when they are used as a heat pump they cause several issues, with the two biggest being water shed and...
The question is for all those who sell, and install new residential systems. Wheather it be GEO, ASHP, AC, PTAC or what ever,
What effect in product mix do you expect to see in the months ahead...
I would chose LG or Media. Gree and AUX can be very low cost.