Search:

Have the system replaced by a professional. There must be a problem with the installation of that system,because it didn't last.

Geothermal heatpumps generate enough hot water for raidiant systems and are an option with most makes

The furnace in front serves the second floor, the other does the first floor. 5000 sq. ft.
There is no ac. An older couple in their 70's live there,and my guess why they do not is older folks like...

Job complete. Before and after.

It would have looked better with the condensate to the left between the return and furnace.

The end cap for the coil door is cool.I never install uv light thats cool also.

Thanks, now I can get the part # and place order tomorrow.

Thanks for the compliment. I figure I will be back there to service in a year and also try to keep a customer. Plus there is more equipment through out the house that will need replaced one day.

Model # was hard to read I got ycaz ld3-46-pc

some one scrached over the model # here is what I got ycaz ld3-46 pc ?

The old unit was the same way, I know, it is a little close. There is enough room to remove burner, but if the heat exchange needs replace I guess the ducts would need disconnected. I was there today...

I would like to find a pdf file on York ycaz chiller and the Isn recip pack control center. I need to replace ambient sensor and would like to learn more about this unit. Any help would be appeciated.

Thanks for the info. Yes,I meant Barometric draft control. Thanks.

Could you have turned the furnace 90 degrees drop the return on one side?

I have a question about the draft diverter, there are 2 of these furnaces that are connected to a common 10" flue, does any one know if I can install a draft diverter on each unit ? I'm not finish...

Can a ge halogen leak detector be used to detect a leak on a r 410a system?

Nice work. I never seen those outside before. I know the doors on them are sealed so I dont see why there should be any problem at all.

i realized that after I posed comment .

I hope the water doesn't freeze and explode the heat exchanger and water pipes on those water heaters this winter.

Im from Baltimore and the trunk is 16". This job was for Paramount Die near Aberdeen. Off 0f 543 Near the Mercedes building

the return and supply are on the wrong sides on one unit the other was ok, one of my suggestions to the boss was to install the unit on the other side on a new curb. there will be a sheet metal cover...

This was one of the tightest duct jobs I have ever done. Going back tomorrow to finish. I hope the return air works out 16+12 sq to 12+12 radius 90 and a 16+12 to 16+10 transition to install. 30,000...

I did install a 2' of and and grille. Thank you. The person we were working for was very picky.

furnace cementer

furnace cementer