Search:

EBI when installed correctly works great. Most complaints come from poor installations by untrained people. It's a powerful tool when setup correctly.

Having worked both service and construction I prefer the service end. When arriving on a service call the customer is usually glad to see you. Construction is dog eat dog for the most part....

Yes, you can run Station R410 on an XP Pro 32 bit PC. Make sure you read and follow the upgrade procedure, it should go fine.

Fenix TK11

https://customer.honeywell.com/en-US/Pages/default.aspx

Tridium is slowly being assimilated into mother Honeywell, resistance is futile. Thinning out middle management is the first step.

Quick builder will not be much help with the XL-Plus points. Only a point list (generated from the CAE database) or access to the CAE project will tell you how the panel is wired.

Only for the XL5000 controlers will this work, plus you will need the CARE project. For the XL-Plus points you will either a point list or the CAE Rebuild file or the CAE project itself.

Technical address of 06.01.01 means channel.controller.point. Any point with XLP in front of the address is a point from a R7044 XL-Plus type controller. XLP01 001 19000060DO means Buss 1, channel 1,...

I change a lot of XD505A cards, most of the time due to lightning strikes. It is always the first thing I look at.

What controlers are you working on?

At $0.50/KM = $0.80/mile, 1.61 kilometer = 1 mile. If you drive 300 miles per week that adds up to $241.5. That would be close to $1000/month, or say $12,000 per year. This should support the vehicle...

More info needed..............
Controler number?
Software being used to commision?

Agree, a power failure should not break the LON links with the LNS database.

http://www.cypressenvirosystems.com/products/wireless-pneumatic-thermostat/

Just did some WiFi pneumatic stats talking to a bacnet interface, works real nice.

Resistance is futile

GE tried to buy us (Honeywell) a while back but the deal was crushed by the European Market. Glad it never happened, GE stock is in the 20''s while Honeywell stock is in the 50's. GE would have...

Look on the inside of the cover............

It would help going up ladders for sure, I would like it for general day to day use. Grabbing the tool bag (LC) from the truck and walking to the job, after 10 minutes or so I find myself having to...

Finally!!!!!!!!!!!!!!!!! Coming soon......................

http://www.slipkid.com/MyPictures/Misc/Misc-Pictures/i-Xdc2h9K/0/X3/185-X3.jpg

The S4 Open works great, simplest bacnet job I have ever done.

It's still a pain to walk up ladders with the LC bag. I wish they had a backpack version. It's still a great bag,,,,,,,,,,,,,,

I got the original controler back up and running. After 4 or 5 tries (power on/off the controller) it would communicate with HVAC-Pro. I was unable to get the new controler to communicate, not sure...

I have been having some control issues with this controler and was tole to replace it. I ordered a new AS-AHU102 controler board. I set the N2 address to match the old controler and set all the...