Search:

Have you tried calling Cornelius tech support? I work for Coca Cola and when I have problems with ABS units I usually call Cornelius also. If you can get ahold of Bert Shackel in tech support he will...

Almost anything larger than a GDM 7 made by True for Coca Cola in the last few years will have a reversing condensor fan motor on it. They will normally have a decal by the serial number plate to...

I work for Coca-Cola and I am not sure but I believe this controler is only available on Coca-Cola branded equipment. We have around 75 of these coolers in accounts right now and so far the only way...

you could make that unit work but you may have to do some re-wiring and you will have to bend some lines so be careful. I guess just because I work with those machines everyday I would not do it. I...

The MAC tool man who stops at our shop also sells these. They are MAC branded so they cost a little more but he does take care of any problems you have with anything I buy from him.
ccnova

I agree see it all the time. Also looks like you are missing the drain pan thats why it ran into the bottom of the vendor.
ccnova

Just curious but who told you to use hot water?
ccnova

cuttin's to quick! I think in this case and many others they should be slowly pulled off!
ccnova

So sorry for your loss. You are in our thoughts and prayers.
ccnova and family

I dont work with the lancer ice dispensers much but lots of times we find that the off cycle agitation on the ice dispenser is timed wrong for the type of ice being used in it. I would also check to...

If anyone is interested in this inspection tool it is on sale now for $104.61 at Amazon.com. ...

Uniweld has Cap'n Hook tips on thier web site. Hook shaped not horseshoe but I believe it is close to what you are looking for. http://uniweld.com/catalog/tips/special_tip/caphook_tips.htm
ccnova

Theres another thread on here about Vetos e-mail not working also. I also tried it yesterday and it didnt work. Is it possible they sold out to Stanley? Maybe its just the link on thier web site?...

I think I got a great deal today. Was on a call and went to a local hardware store called Runnings for some fittings. Saw a "clearance table" up by checkout so I had to have a look. I found a brand...

Not to far north of me yesterday it was -41 below in Pollock, South Dakota! That was air temp not wind chill. It was only -21 below where I am. Today we got up to about 7 above. felt like a heat...

A co-worker bought one of these in Lowes a couple days ago on sale for $26. About half price, its ok but does not come close to being as heavy duty as a Veto. But for the price he said he was just...

Most fountain machines have a timer like you said that controls how often they agitate the ice and how long it agitates. I would contact the manufacturer of the unit and ask them what it should be...

The cables on my Rigid are fairly stiff but they do bend fairly easy. One 3 ft section will pretty much stand straight out. I have not tried it with both sections together yet.
ccnova

I just bought the Rigid at Home Depot for $199. and it came with a free 3 ft extension. I think they are trying to clear them out before the new model hits the stores. I have only used it a couple...

Heres a new addition to the Bosch 10.8--12 Volt Max tool family that should be available...

I have one also. I use it for beer brats and fish and it works great. Only takes 5 or 6 pieces of charcoal to do them also I have not tried chicken yet. My only complaint is that its a little hard to...

I have one also. I use it for beer brats and fish and it works great. Only takes 5 or 6 pieces of charcoal to do them also I have not tried chicken yet. My only complaint is that its a little hard to...

Thanks for the replies everyone! baub I never thought about it but I bet you are right. We no longer bottle here but because we once did there are larger than normal water lines feeding the entire...

At the Coke plant where I work we have a Manitowac SY0505W water cooled ice maker. This morning when it started a cycle I noticed a hammering or ticking sound. I went back to take a look and it...

Just wondering if anyone has any experience with these grills? They have a dual fuel one I am interested in http://www.aussiegrills.com/products_bonza_3_deluxe.php . Also how hard to clean are the...