Search:

Warren Buffett, "I could end the deficit in 5 minutes," he told CNBC. "You just pass a law that says that anytime there is a deficit of more than 3% of GDP, all
sitting members of Congress are...

Found this today. New rack. Wrong valve.

https://lh5.googleusercontent.com/-jka1069g3KU/TqYJP7Arp9I/AAAAAAAABrw/ZgPu5MA2Dpg/s640/%25255BUNSET%25255D.jpg

Ive seen where someone put in a 2D demand cool valve on a 4D compressor. same symptoms.

An over sized drier with the outlet pointed down makes a good reciever. Thats what many of the OEM's are doing.

The only way the left can respond to the truth is with smoke and mirrors. I'm so tired of the tricks and hocuus pocus.
This country needs big change, and quick.

1 million dollars is a drop in the bucket compared to what the public unions shovel out to buy off the democrats.

Whoops wrong post, but you get the idea.

Easy, only private employers are laying any one off.

And a near 0% unemployment rate among public employees can not be sustained with 15% unemployment in the private sector.

It's mostly the public union's that are the problem. Any time your boss (whose been bought and paid for) can rape and loot the tax payers year after year for insane wages and benefits, theres a...

Maybe someone loading the box is shutting off the fans.

Thank you



The BMS is Comtrol. It used to comunicate, however the 4500 board got wet due to roof leak. I am told that these 4500's are no longer available.

I'm open to any and all advice.
...

The customer's BMS does not comunicate with CCN. It is being retrofitted to the customers system. The CCN will be removed and the comm wire utilized.

Wisconsin's nothing. Wait till California wakes up and starts flushing all the whore democrats.

Thanks. It will no longer be on network.

I am in need of converting a carrier RTU with factory installed premier link to T stat control.
The unit is part of a ccn.
Will I need to incorporate any CTI boards into the price or will a t-stat...

Push menu then 7,7,1 . If there is an AO on line it will show up there.
The AO should be part of one of the multiflex boards. Its on the far right side.

You dont want any liquid refrigerant coming from the seperator. It flashes and gets even colder on the way out, then just sits in the reservior getting even colder. It is a bad situation, but can...

At -10 ambient, if the seperator is not heated and insulated, the gas condenses in the seperator and it just goes down hill from there. The reservoir fills with liquid at -10 and cannot presurize. It...

The problem with a cap tube on the reservoir with -10 ambient is it's just going to condense more liquid refrigerant in the reservoir.

http://www.henrytech.com/catalog/2010/r43.pdf

You will need to install a heater on the seperator and reservoir. then insulate them. It is mostly liquid refrigerant you are seeing in the reservoir, not oil. This is the only way I've been able to...

Case nozzel is for R22

I've never had to replace one due to oil problems, but I have replaced them in remodels. And inside there is a screen along the wall that could get plugged with burnt oil and cause problems.

In...

If the oil level at the regulator sight glass is at 1/2 or more, and the pressure is low, than the compressor is nfg. Bellow 1/2 he may just need to raise the level due to the thickness of the...

I'm only working half days...............................................6 am to 6 pm

The most common reason that I have found on Hill cases frosting product is the fans run too long in defrost. I have cured this by moving the clickson closer to the suction outlet.